Features & Specifications - Vinotemp WINE-MATE WM-2500SSWWC Installation, Operation & Care Manual

• Wine-Mate wall mount split cooling systems WM-2500SSWWC are designed
and used to provide a cold temperature between 50~65 °F for a properly
insulated wine cellar.
• The wine cellar will maintain humidity range within 50~70% RH.
• These temperature and humidity ranges like in natural caves are optimized
for long term storage of wine.
• SSWWC units consist of a condensing unit and an evaporator unit; they are
connected by a liquid line and an insulated suction line.
• SSWWC condensing units can be located away from the evaporator unit 50 ft
so that noise and compressor vibration are isolated.
• SSWWC condensing units are water cooled so that exhaust ventilation is not
needed.
• SSWWC evaporator units can be installed inside a wine rack or between two
wall studs, making them an idea choice for wine cabinets or small wine
rooms.
Fig. 1 SSWWC Wall Split Cooling System
NOTE:
Capacity is determined under the cellar, the cellar ambient and the
condenser inlet water temperatures of 55°F, 75°F and 75°F, with R13
interior and R19 exterior insulations. Any higher ambient and water
temperatures, lower insulations will cause reducing capacity and the cellar
temperature may not be maintained at 55°F.
Features and Specifications
- 4 -