Features & Specifications - Vinotemp WINE-MATE WM-4500DS Installation, Operation & Care Manual

Duct packaged cooling system
Hide thumbs Also See for WINE-MATE WM-4500DS:
Table of Contents

Advertisement

• Wine-Mate duct packaged cooling systems WM-4500~8500DS are designed
and used to provide a cold temperature between 50~65 °F for a properly
insulated wine cellar.
• The wine cellar will maintain humidity range within 50~70% RH.
• These temperature and humidity ranges like in natural caves are optimized
for long term storage of wine.
• It is self-contained ready for use and no extra refrigeration tubing is required
in the field.
• The cooling systems are designed to provide chilled air to wine a cellar
through ducts and can be located up to 25 ft away for quiet operation. It also
provides more installation flexibility.
• The systems can be installed both outdoor and indoor.
• Back-curved impeller fans are good for total 50 ft long duct.
Fig. 1 DS Duct Packaged Cooling System
NOTE:
Capacity is determined under the cellar, the cellar ambient and the
condensing unit ambient temperatures of 55°F, 75°F and 90°F, with R13
interior and R19 exterior insulations. Any higher ambient temperatures,
lower insulations will cause reducing capacity and the cellar temperature
may not be maintained at 55°F.
CAUTION:
If the installation area will be below 50°F, purchase a low ambient condition
kit.
Features and Specifications
- 4 -

Advertisement

Table of Contents
loading

Table of Contents