Table of Contents
Advertisement
• Wine-Mate rack split cooling systems WM-2500~6500SSR are designed and
used to provide a cold temperature between 50~65 °F for a properly insulated
wine cellar.
• The wine cellar will maintain humidity range within 50~70% RH.
• These temperature and humidity ranges like in natural caves are optimized
for long term storage of wine.
• SSR units consist of a condensing unit and an evaporator unit; they are
connected by a liquid line and an insulated suction line.
• SSR condensing units can be located away from the wine cellars 50 ft so that
noise and compressor vibration are isolated.
• SSR evaporator units are designed for installation inside a rack or between
two ceiling joists, making them an ideal choice for small and medium wine
cellars. There are also multiple air inlet and outlet doors for different
installations.
NOTE:
Capacity is determined under the cellar, the cellar ambient and the
condensing unit ambient temperatures of 55°F, 75°F and 90°F, with R13
interior and R19 exterior insulations. Any higher ambient temperatures,
lower insulations will cause reducing capacity and the cellar temperature
may not be maintained at 55°F.
CAUTION:
If the installation area will be below 50°F, purchase a low ambient condition
kit.
Features and Specifications
Fig. 1 SSR Rack Split Cooling System
- 4 -
Advertisement
Table of Contents
