Temperature Control - Vinotemp VT- 2 6 SB1 0 Owner's Manual

OPERATING INSTRUCTIONS
1. Gently place/slide the racks in the wine cellar.
2. Determine the best temperature setting to use.
3. Place bottles inside the cooler.
4. Plug the power cord into a standard electrical outlet.
5. Limit the frequency of opening the door to conserve energy and
maintain proper storage temperature.
6. You can turn the interior light on and off by touching the button
labeled "Light" on the front control panel.
7. If unit is equipped with a lock, insert provided key and turn to
operate lock. Make sure key is kept in a secure place when not in
use.
Important: When using the wine cellar for the first time, allow at least
24 hours for the internal temperature to adjust properly. Make sure there
are at least 3 to 5 bottles in the unit.
Important: In order to operate efficiently, this product should be
in an environment with an ambient temperature of less than 90°F
(32°C).
Temperature preset:
For your convenience, the wine cellar is programmed at storing
temperature. The temperature pre-set by the manufacturer is 54°F
(12°C).
Setting the temperature control (manually):
You can manually adjust the temperature. Simply press the
the control panel to decrease the temperature and the
increase the temperature inside the wine cellar. The temperature range
for this unit is from 45°F (7°C) to 65°F (18°C).
When the cabinet temperature is too low, the LED will display "LL". When
the temperature is too high, it will display "HH". The "ER" display shows
when there has been a power disruption.
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1

TEMPERATURE CONTROL

i n f o @ v i n o t e m p . c o m
button on
button to
9