Table of Contents
Advertisement
During operation, the value displayed on the control panel when the keys are not
being pressed, is always the temperature inside the cabinet.
Temperature Adjustment Order/Process
1. If you want to increase both the upper and lower settings, it is essential that
you adjust the upper setting first (SET2), then the lower setting (SET1).
2. When you want to lower both settings (lower and upper), it is essential that
you adjust the lower setting (SET1) first, then the upper setting (SET2).
The temperature inside the cabinet can be selected by adjusting the two
thermostat values in the following way:
Adjusting the upper set temperature (SET2):
1. Press the
key for a second to display the upper set point code.
2. Then click on
3. Increase the value with
4. Hold down the
Adjusting the lower set temperature (SET1):
Press the key for a second and repeat the procedure described above.
Note: The cabinet is delivered with the set points pre-programmed at 53.6°F for
the upper set point (SET2) and at 51.8°F for the lower set point (SET1). These
parameters were set for optimal everyday use of your cabinet.
Recommended temperature range setting is between 50°F and 57°F.
Two types of alarm can appear on the setting display:
• HI indicates that the temperature inside the cabinet is too high.
• LO indicates that the temperature is too low.
Both alarms mean that the cabinet is malfunctioning. The alarm signal
automatically disappears once the temperature returns to normal.
Important: You will need to wait approximately 48 hours before you notice the
effects of the temperature change.
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
TEMPERATURE CONTROL
to display the upper set point value.
or decrease it with
key to confirm the new value.
TEMPERATURE ALARM
i n f o @ v i n o t e m p . c o m
.
10
Advertisement
Table of Contents
