Table of Contents
Advertisement
IMPORTANT: In order to operate efficiently, this product should be in an
environment with an ambient temperature of less than 90°F (32°C).
Temperature preset:
For your convenience, the manufacturer has pre-set the temperature of the unit
at 48°F (9°C).
Setting the temperature:
You can manually adjust the temperature. Simply press the "
control panel to decrease the temperature and the "
temperature by 1 degree increments inside the beverage cooler. The
temperature range for this unit is from 40°F (4°C) to 65°F (18°C).
When the cabinet temperature is too low, the LED will display "LL". When the
temperature is too high, it will display "HH". The "ER" display shows when there
has been a power disruption.
•
Always unplug the beverage cooler before cleaning.
•
Do not use benzene, scrubbing brushes or chemical cleaners as these will
damage the unit.
•
Use only a mild, nonabrasive cleanser to clean the exterior of the cabinet.
•
Clean the stainless steel door and handle by wiping with a warm water and
baking soda solution. The solution should be about 2 tablespoons of baking
soda to a quart of water.
•
Wash the racks with a mild detergent solution.
•
Always dry all parts with a clean dry cloth before plugging the beverage
cooler back into the receptacle.
MOVING YOUR BEVERAGE COOLER
•
Always unplug the beverage cooler before moving.
•
Always remove all beverages before moving the beverage cooler.
•
Securely tape down all loose items (shelves) inside your appliance.
•
Turn the leveling legs up to the base to avoid damage.
•
Tape the door shut.
•
Be sure the beverage cooler stays in the upright position during
transportation
•
Protect the outside of appliance with a blanket or similar item when moving
as needed.
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
TEMPERATURE CONTROL
CLEANING AND CARE
i n f o @ v i n o t e m p . c o m
" button on the
" button to increase the
7
Advertisement
Table of Contents
