Wine Cellar Installation; Operating Instructions; Temperature Control - Vinotemp VT-WC58GNV-SB10 Owner's Manual

WINE CELLAR INSTALLATION

 Remove the exterior and interior packaging before use.
 Check to be sure you have all of the parts, including an accessory kit and 1
owner's manual.
 Place your wine cellar on a flat, dry surface that is strong enough to support
the unit when fully loaded.
 This unit is designed to be built-in (fully recessed) or free standing.
 Do not place heavy objects on top of the unit.
 Unit is not designed for installation in a garage or basement.
 Do not place the unit in direct sunlight or near sources of heat. Extreme hot
and cold ambient temperatures may cause the unit not to perform properly
or increase electrical consumption.
 Do not place the unit next to a major appliance that emits large amounts of
heat, such as a dishwasher, microwave, oven, etc.
 Do not plug unit into the same outlet as a refrigerator or microwave.
 Before connecting the appliance to the power source, let it stand upright for
approximately 24 hours. This will reduce the possibility of a malfunction in
the cooling system from handling during transportation.
 Clean the interior surface with a soft cloth and lukewarm water before first
use.

OPERATING INSTRUCTIONS

1. Gently place/slide the racks in the wine cellar.
2. Determine the best temperature setting to use.
3. Place bottles inside the cooler.
4. Plug the power cord into a standard grounded electrical outlet.
5. Limit the frequency of opening the door to conserve energy and maintain
proper storage temperature.
6. You can turn the interior light on and off by touching the button labeled
with a light on the front control panel.
7. If unit is equipped with a lock, insert provided key and turn to operate lock.
Make sure key is kept in a secure place when not in use.
Important: When using the wine cellar for the first time, allow at least 24 hours
for the internal temperature to adjust properly. Make sure there are at least 3 to
5 bottles in the unit.
IMPORTANT: To operate efficiently, this product should be in an environment
with an ambient temperature of less than 90°F (32°C).
Temperature preset: For your convenience, the manufacturer has pre-set the
temperature of the unit at 54°F (12°C).
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1

TEMPERATURE CONTROL

i n f o @ v i n o t e m p . c o m
Meijer.com
7