A-B Repeat Playback Settings (Audio Cds Only) - Tascam CD-400U Owner's Manual

4 – CD/SD/USB playback

A-B repeat playback settings (audio CDs only)

Specified intervals within a track can be played back (A-B repeat
playback). Follow the procedures below to use A-B repeat play-
back.
1.
Select CD as the current source. (see "Selecting the playback
source. " on page 22)
2.
When playing back or when playback is paused at the point
where you want to the repeat playback interval to start (A),
press the main unit 5 [A-B REP] button when the shift mode
is activated (SHIFT indicator lit) or press the remote control
A-B REP button.
A- appears on the Home Screen.
CD A-
3.
At the point where you want the repeat playback interval
to stop (B), press the main unit 5 [A-B REP] button when
the shift mode is activated (SHIFT indicator lit) or press the
remote control A-B REP button.
A-B appears on the Home Screen.
This confirms the set interval (A-B) and starts A-B repeat
playback.
CD A-B
CAUTION
A-B repeat is not possible with data CDs, SD cards or USB
flash drives.
NOTE
i Press the main unit STOP button or remote control 8 button
to stop the unit and clear the set A-B repeat interval. Chang-
ing the track or the current source will also clear the repeat
interval.
i The A-B repeat playback interval cannot include more than
one track.
i The A-B repeat setting is not retained when the unit is turned
off.
28
TASCAM CD-400U
PLAY
01 00:10
PLAY
01 00:22
Using the power-on-play function
By using a commercially-available timer, for example, to turn this
unit on, you can make it start playing at a desired time.
1.
Connect the unit to the timer so that it receives power from
the timer power output in advance.
2.
Select the current source for playback. (see "Selecting the
playback source. " on page 22)
3.
Press the main unit 2 [P.O PLAY] button when shift mode is
active (SHIFT indicator lit) or press the remote control P.O
PLAY button to turn the power-on-play function on. (De-
fault: off )
PWR On Play On
4.
With this unit's POWER switch set to on, turn the power off
from the timer, and set the timer to turn on at the desired
time.
The power will turn on at the desired time, and the unit will
automatically start playback.
NOTE
i The P icon appears on the Home Screen when the power-on-
play function is on.
CD
i The power-on-play function on/off setting is retained even
when the unit is turned off.
01 00:01
PLAY P
01 00:10