Creating A Stereo Master Track - Tascam DP-008EX Owner's Manual

Digital multitrack recorder
Table of Contents

Advertisement

2–Quick Start Guides
9.
Return to the beginning of the song
(00h00m00s00f ) and press the Play (7) button
while pressing and holding the Record (0)
button to begin recording. Play the lead guitar
part.
The Record (0) indicator lights and the TRACK 3
REC indicator stops blinking and stays lit.
10. When you are finished playing, press the Stop (8)
button to stop recording.
11. Press the TRACK 3 REC button to turn its REC
indicator off.

Creating a stereo master track

After finishing the recording, we will mix down the
tracks and create a stereo master track
1.
Use the TRACK 1-3 LEVEL knobs to adjust the
level. Use the MASTER LEVEL knob to adjust the
overall level.
Use the TRACK 1-3 PAN knobs to adjust the
2.
stereo positions.
Watch the
(left channel) and
level meters on the display as you make these
adjustments.
20
TASCAM DP-008EX
3.
4.
(right channel)
NOTE
The stereo master track will be created by mixing
down the audio between the IN and OUT points.
Press the IN/OUT button to open the I/O SETTING
screen.
Press the Play (7) button to start playing the
song back, and press the F3 [IN] button to set the
IN point at the point where you want to start the
mix down for the stereo master track.
A
pop-up message appears.
SET IN !

Advertisement

Table of Contents
loading

Table of Contents