Screen Operations - Tascam DP-008EX Owner's Manual

Screen operations

After using the MENU button or a dedicated button
to open a screen, use the screen in the following
manner.
This section describes the basic operation procedures.
Depending on the screen that is open the assign-
ments of the function buttons might differ.
NOTE
During playback or recording, you cannot open
screens that might access the SD card. If you try
to open one of these screens, a
(the recorder is not stopped) pop-up message will
appear.
Function buttons
The currently assigned function of each button is
shown above it at the bottom of the screen. In this
manual, for convenience, we refer to the function
buttons as F1, F2, F3 and F4 in order from the left.
appears above the F1 button, showing that this
BACK
is the function assigned to this button on the screen.
In this manual, we write this as "F1 [BACK] button".
In a similar manner the assignments for the F2, F3
and F4 buttons are
EXEC
0 Use the DATA wheel to select (highlight) items
you want to access.
This example shows the
On the screen, the
SONG
(highlighted).
0 When there are more items in the menu list above
(below) those currently shown, a 5 and b icon
appears at the top (bottom) of the scrollbar in
the right half of the screen. (In the
shown above, the b shows that there is at least
one more item below
0 If an item has a submenu (as on the
for example), an t appears to its right, and
pressing the F4 [t] button will open it.
0 In a submenu, you can press the F1 [BACK]
button to return to the previous screen.
3 – Names and functions of parts
Not Stopped
, and in that order.
INS DEL
screen.
MENU
item is selected
screen
MENU
.)
DATA BUCKUP
screen,
MENU
0 To execute an operation, press the function
button that has
EXEC
This example shows the
Press the F2 [EXEC] button to load the selected
(highlighted) song.
0 When a setting value is selected (highlighted),
use the DATA wheel to change the value.
To select (highlight) different item press the
function button that has 5 or b assigned to it.
This example shows the
Use the DATA wheel to change the
(the track that is being copied) value.
Use the F3 [5] and F4 [b] buttons to move up
and down to change the selected (highlighted)
item.
Press the F2 [EXEC] button to clone the track
using the settings that you made.
0 When moving left or right is possible, use the
m [RTZ] and , [LRP] buttons. When this
operation is possible, an illustration on the screen
shows the assignment of the m and ,
buttons to cursor movement.
0 To continue to the next operation, press the F4
[NEXT] button.
0 To leave a screen that was accessed using a
dedicated button, press the F1 [EXIT] button.
0 To return to the Home Screen, press the HOME
button.
assigned to it.
screen.
SONG LOAD
screen.
CLONE TRACK
SOURCE TRK
31
TASCAM DP-008EX