Transferring The Stereo Master Track To A Computer; Shutting Down The Unit - Tascam DP-008EX Owner's Manual

Digital multitrack recorder
Table of Contents

Advertisement

Press the F3 [EXEC] button to start automatic
7.
mastering.
NOTE
If off-line peak detection has not yet been
conducted for the stereo master track that is being
automatically mastered, a
message appears to show that off-line peak
detection is being conducted.
When off-line peak detection completes, the
following pop-up message appears. Press the F3
[YES] button to start automatic mastering.
Press the F4 [NO] button to cancel automatic
mastering and return to the
screen.
8.
When automatic mastering completes, the
screen reopens with the
MASTERING
.
OFF
9.
When you are done mastering, press the
BOUNCE/MIXDOWN/MASTERING button to
open the
RECORDER MODE
10. Use the DATA wheel to select (highlight)
, and press the F4 [EXEC] button to return
TRACK
to the
MUL TI TRACK
pop-up
Peak Detect
AUTO MASTERING
AUTO
set to
TYPE
screen.
MUL TI
recorder mode.
2–Quick Start Guides
Transferring the stereo master track
to a computer
You can connect this unit to a computer using the
included USB cable and transfer the stereo master
track that you created in "Creating stereo master
tracks" on page 62 in order to, for example, burn it
to a CD.
For instructions about how to transfer a stereo master
track to a computer, see "Exporting stereo master
tracks" on page 81.

Shutting down the unit

When you are finished, shut down the unit.
Press the HOME button to open the Home
1.
Screen.
2.
Press and hold the
appears on the screen.
POCKETSTUD IO
The power turns OFF automatically after the unit
completes its shutdown process (saving various
information about operations conducted until
now).
Always follow this procedures to shut down the
unit properly.
CAUTION
If you remove the batteries, disconnect the power
cord or otherwise interrupt the power, the unit
cannot shut down properly and all recorded data
and settings that have been changed since the last
shutdown or song saving operation will be lost.
These data and settings cannot be recovered.
button. Release it when
23
TASCAM DP-008EX

Advertisement

Table of Contents
loading

Table of Contents