Table of Contents
Advertisement
6.
In order to use the built-in mic to record singing
to track 3, use the DATA wheel to set the INPUT
B input source to
Internal MIC/Low
Internal MIC/Hi gh
source" on page 42.)
This sets the built-in mic on the right side of the
front panel (MIC B) as the input source for INPUT
B.
NOTE
Internal MIC/Low
change the input gain of the built-in mics. Set it
according to the loudness of the input.
If you are not sure which setting to use, choose
Internal MIC/Low
after adjusting it, return to the
screen and change the setting to
.
MIC/Hi gh
After changing the setting, press the HOME
7.
button to return to the Home Screen.
or
. (See "Selecting the input
and
Internal MIC/Hi gh
. If the input level is too low
INPUT SETTING
Internal
2–Quick Start Guides
Setting the guitar as the TRACK 1
recording source
When the recorder is stopped, press the ASSIGN
button to open the
INPUT ASSIGN
has the following default values.
Recording track
TRACK 1, 3, 5, 7
TRACK 2, 4, 6, 8
In "Connecting and setting the input sources" above,
we made a guitar the input source for INPUT A and a
built-in mic (MIC B) the input source for INPUT B on
the
screen.
INPUT SETTING
Therefore, the guitar is already set to record to tracks
1, 3, 5 and 7 and the built-in mic (MIC B) is ready to
record to tracks 2, 4, 6 and 8.
As a result, there is no need to change the input
source assignments to record the guitar to TRACK 1
in this example.
Adjusting the input level and
monitoring
1.
Press the HOME button to return to the Home
Screen.
screen, which
Recording
Default
source
INPUT A
A
INPUT B
B
15
TASCAM DP-008EX
Advertisement
Table of Contents
