Connecting with other equipment
This section shows examples of connections that can
be made with this unit.
8 Precautions before making connections
•
Turn the power OFF (or put in standby) for
this unit and all other equipment that you will
connect to it.
•
Set up all the equipment so that all units are
powered from the same line. When using a
power strip, for example, use a thick cable with
a high current capacity to reduce fluctuation of
the power voltage.
Rear panel connections
Footswitch
(standard jack)
Drum machine
Keyboard to INPUT A/B
NOTE
Before outputting sound, use the VOLUME dial of
any external monitoring system (powered monitor
speakers or an amplifier and speakers) connected
to the unit. Failure to do so could cause loud noises
that might harm your hearing.
Headphone
Powered speakers or
ampli er and speakers
Mic to INPUT A/B
Guitar/bass to INPUT A
4 – Preparations
Right side panel connections
TASCAM
PS-P520
(sold separately)
DC plug
Mini-B USB plug
NOTE
•
Recorder functions cannot be used when
connected to a computer by USB.
•
This unit can only be connected to a computer
by USB when the recorder mode is set to
.
TRACK
AC wall socket
Computer
USB
MUL TI
35
TASCAM DP-008EX