Multi Track Recorder Screen - Tascam Sonicview 16XP Reference Manual

MULTI TRACK RECORDER Screen

Use this screen to make settings and show the status of the IF-
MTR32 (multitrack recorder) card installed in SLOT 1 or SLOT 2.
Tap Menu Screen > Recorder/Player menu > Multi Track
Recorder to open this screen. This screen can also be opened by
tapping "Recorder/Player: MTRw" shown for the slot with the
IF-MTR32 installed on the SLOT SETUP Screen.
NOTE
When the IF-MTR32 card is initializing, the "Multi Track
Recorder" sub menu item will be shown in gray on the Menu
Screen, and the MULTI TRACK RECORDER Screen will not
open even if it is tapped. Wait a while until it becomes usable.
When in LIVE RECORDING MODE or VIRTUAL
SOUND CHECK MODE
Screen appearance in LIVE RECORDING MODE
When in OVERDUB MODE
1 Project Name
o This shows the name of the currently open project.
o Tap this area when the MTR is stopped to open the
BROWSE MTR Screen, which shows a project list. (See
"Selecting projects" on page 248.)
2 AUTO ROUTING button
Tap this button when the MTR is stopped to open an AUTO
ROUTING confirmation message. (See "Using the AUTO
ROUTING function" on page 238.)
12 - Multitrack Recorder
3 Take Name
o This shows the name of the currently open take.
o Tap this area when the MTR is stopped to open the
BROWSE MTR Screen, which shows a list of takes in the
current project. (See "MULTI TRACK RECORDER - BROWSE
Screen" on page 245.)
4 MTR operation mode button
o This shows the current MTR operation mode.
i LIVE RECORDING MODE
i VIRTUAL SOUND CHECK MODE
i OVERDUB MODE
o Tap this button when the MTR is stopped to open the MTR
operation mode switching menu. (See "Using the AUTO
ROUTING function" on page 238.)
5 MTR menu button ( )
Tap this button when the MTR is stopped to open the
dedicated MTR Menu Screen. (See "MULTI TRACK RECORDER
- MENU Screen" on page 243.)
6 Meters and REC READY/INPUT MONITOR indicator
area
o This area shows the meters and REC READY/INPUT
MONITOR states of each track.
o 32 tracks are shown when the Sampling Rate (Max Tracks)
button (2) setting is "48kHz/32tracks" on the MULTI
TRACK RECORDER - MENU Screen, and 16 tracks are shown
when this is set to "96kHz/16tracks". (See "MULTI TRACK
RECORDER - MENU Screen" on page 243.)
o Each meter has an overload indicator at its top. They
will appear to light red when the signal level reaches or
exceeds -0.00026 dBFS (16-bit full-scale value).
o When a level overload occurs, the entire bar meter will
light red.
o The area below -60 dBFS at the bottom of the level meters
will light when above -70 dBFS.
o When REC READY is on, the
appear red ( ).
o When INPUT MONITOR is on, the
will appear blue ( ).
o Tap this area to open a REC READY / INPUT MONITOR
settings window below the meters for the group of
8 tracks in the area tapped. (See "REC READY/INPUT
MONITOR settings" on page 241.)
TASCAM Sonicview 16XP/Sonicview 24XP V1.5.0
icon below the meter will
icon below the meter
233