2–Quick Start Guides
4 Use the
wheel keys to select
DATA
to load this song that does not have any
F2 (EXEC)
recordings in it yet.
The
menu screen reopens.
SONG
5 Press the
key to return to the Home Screen.
HOME
Setting the guitar as track 1 recording source
The default settings are for the
the recording source for tracks 1 and 3 and for the
channel to be the recording source for tracks
INPUT B
2 and 4.
In "Connecting and setting the input sources" above,
we made a guitar the input source for the
channel and a built-in mic (
for the
channel. Therefore, the guitar is
INPUT B
already set to record to tracks 1 and 3 and
ready to record to tracks 2 and 4.
As a result, there is no need to change the input
channel assignments to record the guitar to track 1
in this example. See "Adding another recording (1)"
on page 21 and "Adding another recording (2)" on
page 22 for how to change track recording sources.
18
TASCAM DP-004
and press
SONG001
channel to be
INPUT A
INPUT A
) the input source
MIC B
is
MIC B
Adjusting the input level and monitoring
Use the
channel
INPUT A
guitar input level.
Set the
knob so that the
LEVEL
indicator does not light even when the loudest sound
to be recorded is input. If the indicator continues to
light even when the
LEVEL
guitar signal itself is too loud. In this case, lower the
output level on the guitar.
OL indicator
When you play the guitar, its input level is shown by
the
meter on the screen.
A
knob to adjust the
LEVEL
channel
INPUT A
OL
knob is turned down, the