Enabling Sata Raid In The Bios - Supermicro Supero A+ SERVER 1042G-TF User Manual

A+ SERVER 1042G-TF User's Manual
Note: You need to have an external USB fl oppy when building the driver diskette.
Window's Vista, Windows 2008 or later Windows OS systems can use a USB stick
instead of a fl oppy.

Enabling SATA RAID in the BIOS

Before installing the Windows Operating System, you must change some settings
in BIOS. Boot up the system and hit the <Del> key to enter the BIOS Setup Utlility.
After the Setup Utility loads,
1. Use the arrow keys to move to the Exit menu. Scroll down with the arrow
keys to the "Load Optimal Defaults setting and press <Enter>. Select "OK" to
confi rm, then <Enter> to load the default settings.
2. Use the arrow keys to move to the "Advanced" menu, then scroll down to
"IDE/SATA Confi guration" and press the <Enter> key. Once in this submenu,
scroll down to "OnChip SATA Type" and choose the "RAID" option (see Figure
2-4).
3. Hit the <Esc> key twice and scroll to the Exit menu. Select "Save Changes
and Exit" and hit <enter>, then hit <Enter> again to verify.
Figure 5-6. BIOS Setup Screen
5-24