Remote Transmitter Programming - CrimeStopper Fortress FS-40 Installation Handbook

PROGRAMMING – TRANSCEIVERS & TRANSMITTERS
1. Turn key to the ON position.( doors will lock if autolock is programmed )
2. Press Programming button 4 times, then after a few seconds the unit will flash the parking lights 4 times.
3. Press button #1 (Lock) of the transmitter. You should get 2 light flashes indication the unit is waiting for a 2
press the same combination of buttons on a second remote, the unit will flash 3 times indicating its waiting for the 3
and lights will flash 4 times for 4
otherwise turn key off and close hood.
OFF
th
code. If all 4 codes are learned, the unit will automatically exit code-learning mode,
IGN
PRESS 4X's
FLASH 2, 3, or 4 X's
PRESS
LOCK
WAIT FOR
4 FLASHES
OFF
COMPLETE
25
nd
code, then
rd
code
IGN