System Snmp Community; Config Hosts - Fortinet Version 3.0 Administration Manual

config CLI commands

system snmp community

Use this command to configure SNMP communities. Add SNMP communities so that the FortiBridge
unit can send SNMP v1 and v2c traps to SNMP managers when action on failure is set to send SNMP
traps. You can add up to three SNMP communities. Each community can have a different configuration
for SNMP traps. You can also the add IP addresses of up to 8 SNMP managers to each community.
Command syntax pattern
config system snmp community
edit <id_integer>
set <keyword> <variable>
end
config system snmp community
edit <id_integer>
unset <keyword>
end
config system snmp community
delete <id_integer>
end
get system snmp community [<id_integer>]
show system snmp community [<id_integer>]
The config system snmp community command has one subcommand.

config hosts

Keywords and variables
name <name_str>
status {disable | enable} Enable or disable the SNMP community.
trap_v1_lport
<local-port_integer>
trap_v1_rport
<remote-port_integer>
trap_v1_status
| enable}
trap_v2c_lport
<local-port_integer>
trap_v2c_rport
<remote-port_integer>
trap_v2c_status {disable
| enable}
config hosts
Access the hosts subcommand using the snmp community command. Use this command to add
SNMP manager IP addresses to an SNMP community.
FortiBridge Version 3.0 Administration Guide
09-30000-0163-20061109
Description
The name of the SNMP community.
SNMP v1 local port number used for sending traps to the
SNMP managers added to this SNMP community.
SNMP v1 remote port number used for sending traps to the
SNMP managers added to this SNMP community.
Enable or disable SNMP v1 traps for this SNMP community.
{disable
SNMP v2c local port number used for sending traps to the
SNMP managers added to this SNMP community.
SNMP v2c remote port number used for sending traps to the
SNMP managers added to this SNMP community.
Enable or disable SNMP v2c traps for this SNMP community.
system snmp community
Default
No default.
enable
162
162
enable
162
162
enable
71