Restore - Fortinet Version 3.0 Administration Manual

Fortinet bridge administration guide

Hide thumbs Also See for Version 3.0:

Table of Contents

execute CLI commands

restore

Use this command to restore a backup configuration and to change the FortiBridge firmware.

Command syntax

execute restore config <filename_str> <tftp-server_ipv4>

execute restore image <filename_str> <tftp-server_ipv4>

Keywords and variables

config

image

<filename_str>

<tftp-server_ipv4>

Example

This example shows how to upload a configuration file from a TFTP server to the FortiBridge unit and

restart the FortiBridge unit with this configuration. The name of the configuration file on the TFTP

server is backupconfig. The IP address of the TFTP server is 192.168.1.23.

execute restore config backupconfig 192.168.1.23

FortiBridge Version 3.0 Administration Guide

09-30000-0163-20061109

Description

Restore a system configuration. The new configuration replaces the existing

configuration, including administrator accounts and passwords.

Upload a firmware image from a TFTP server to the FortiBridge unit. The

FortiBridge unit reboots, loading the new firmware.

The name of file that is uploaded from the TFTP server.

The TFTP server IP address.

restore

Table of Contents

Fortibridge 3.0