Download
Share
Print this page
Fortinet FortiAnalyzer 3700G Quick Start Manual
  1. Manuals
  2. Brands
  3. Fortinet Manuals
  4. Network Hardware
  5. FortiAnalyzer 3700G
  6. Quick start manual

Fortinet FortiAnalyzer 3700G Quick Start Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
FortiAnalyzer 3700G
QuickStart Guide

Advertisement

loading

Related Manuals for Fortinet FortiAnalyzer 3700G

Summary of Contents for Fortinet FortiAnalyzer 3700G

  • Page 1 FortiAnalyzer 3700G QuickStart Guide...

  • Page 2: Before You Begin

    Copyright© 2021 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare® and FortiGuard®, and certain other marks are registered trademarks of Fortinet, Inc., in the U.S. and other jurisdictions, and other Fortinet names herein may also be registered and/or common law trademarks of Fortinet. All other product or company names may be trademarks of their respective owners.

  • Page 3: Package Contents

    Package Contents Setup Unpack the box, power on your device and connect the Ethernet Port to an internet connection. Next, set up your Fortinet device using the GUI or CLI. FortiAnalzyer 3700G Ethernet Port Management Computer Ethernet Cable Note: For static IP configuration, use 192.168.1.1 with subnet mask...

  • Page 4: Rack Installation

    Do not pick up the device with the front handles. They are designed to pull the system from a rack only. Locking Electrostatic discharge (ESD) can damage your Fortinet equipment. To avoid personal injury or damage to the unit, it is recommended that two or more people install the unit into the rack.
  • Page 5 Disassemble the rail assembly: Install the outer rails on a rack: 1. Identify the left and right rail assemblies. 1. Press up on the locking tab on the back of the middle rail. 2. Pull out the inner rail until it is fully extended. 2.
  • Page 6 Install the cable management arm 7. Open the red caps and route the cables through the wire carrier. This is important to ensure that cables are not damaged when sliding the device in and out of the rack. 1. Slide the device part way out of the rack to provide space for installing the cable management arm.

  • Page 7: Hard Drive Installation

    Hard Drive Installation Front This device supports 60 x 3.5" hard drives in toolless hard drive carriers. To install a hard drive: 1. Power down the system and disconnect the AC power cords WARNING: Do not operate the device with drives removed, unless for short periods of time such as when hot-swapping hard drives Power Button System power on and off Reset Button System reset...
  • Page 8 Console (DB9) CLI management connection VGA (DB15) Not in use SFP+ Ports 3 & 4 (SFP+) 25Gbps/10Gbps network connections IPMI (RJ45) Do not use. Please change the default password: Link (Top LED) Activity (Bottom LED) https://cookbook.fortinet.com/changing-ipmi-password Green: Connected at 25Gbps Green: Link established Amber:...
  • Page 9 Batterie – Risque d’explosion si la batterie est remplacée par un type incorrect. Ne jetez pas les batteries au feu. Ils peuvent exploser. Jetez les piles https://www.fortinet.com/bsmi usagées conformément aux réglementations locales. IMPORTANT: Suisse: l’annexe 4.10 de SR814.013 s’appliquent aux batteries.
  • Page 11 Fortinet.com...