Connectors; Factory Default Configuration - Fortinet Version 3.0 Administration Manual

FortiBridge unit basic information

Connectors

Factory default configuration

22
Table 5: FortiBridge-1000 connectors
Connector Type Speed
INT 1 RJ-45 10/100/1000
Base-T
EXT 1 RJ-45 10/100/1000
Base-T
INT 2 RJ-45 10/100/1000
Base-T
EXT 2 RJ-45 10/100/1000
Base-T
CONSOLE RJ-45 9600 bps
Table 6: FortiBridge-1000F connectors
Connector Type Speed
INT 1, INT 2, LC SFP 1000Base-SX
EXT 1,
EXT 2, and
management
CONSOLE RJ-45 9600 bps
Table 7: FortiBridge-1000 and 1000F unit factory default network configuration
Administrator account
Password
Management IP/Netmask
Management Access
Routes
Primary DNS
Secondary DNS
Protocol Description
Ethernet Copper gigabit ethernet connection to the internal
network.
Ethernet Copper gigabit ethernet connection to the
external network.
Ethernet Copper gigabit ethernet connection to the
FortiGate unit internal interface.
Ethernet Copper gigabit ethernet connection to the
FortiGate unit external interface.
RS-232 Optional connection to the management
serial computer.
Provides access to the command line interface
(CLI).
Protocol Description
Ethernet Multimode fiber optic connections
to gigabit optical networks. The
FortiBridge-1000F is shipped with
4 1000Base-SX Small Formfactor
Pluggable (SFP) transceivers that
you must insert into the INT 1, INT
2, EXT 1, and EXT 2 sockets on
the back panel. The management
connection is optional.
RS-232 Console connection to the
serial command line interface (CLI).
admin
(none)
192.168.1.99/255.255.255.0
Telnet, SSH and ping access to the INT 1
interface. No management access to the EXT 1
interface.
(none)
65.39.139.53
65.39.139.63
FortiBridge Version 3.0 Administration Guide
Setting up FortiBridge units
09-30000-0163-20061109