Speco 650Line Intensifier3™ Series Instruction Manual page 33

3. Set the SPECO DNR mode to 'ON' and press the Function Setup switch. Then you can adjust the noise
reduction level.
☞
NOTE
■ You cannot set the SPECO DNR to 'ON' or 'OFF' when the AGC mode of the EXPOSURE menu is 'OFF'.
■ When adjusting the noise reduction level in the SPECO DNR mode, remember that the higher
the level set, the more the noise level will be reduced, as will the brightness of the image.
Day/Night Setting
●
You can display pictures in color or black and white.
1. When the SETUP menu screen is displayed, select 'DAY/NIGHT'by using the Function
Setup switch so that the arrow indicates 'DAY/NIGHT'.
2. Select a desired mode using the Function Setup Switch according to the picture display
you want.
◆ COLOR : The picture is always displayed in color.
◆ B/W : The picture is always displayed in black and white.
- BURST MODE : You can turn on or off the burst
signal on B/W mode.
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.WDR OFF
5.BACKLIGHT OFF
6.SPECO DNR ON
7.DAY/NIGHT AUTO
8.SPECIAL
9.RETURN SAVE
B/W MODE SETUP
1.BURST MODE OFF
2.RETURN
32