Installing Child Safety Seats With Lower Anchors And Tethers For Children - Ford 2013 Flex Owner's Manual

Hide thumbs Also See for 2013 Flex:
Table of Contents

Advertisement

Ford recommends checking with a NHTSA Certified Child Passenger
Safety Technician (CPST) to make certain the child restraint is properly
installed. In Canada, check with your local St. John Ambulance office for
referral to a CPST.
INSTALLING CHILD SAFETY SEATS WITH Lower Anchors AND
Tethers FOR CHildren (LATCH)
WARNING: Never attach two child safety seats to th same
anchor. In a crash, one anchor may not be strong enough to hold
two child safety seat attachments and may break, causing serious injury
or death.
WARNING: Depending on where you secure a child restraint,
and depending on the child restraint design, you may block
access to certain safety belt buckle assemblies and/or LATCH lower
anchors, rendering those features potentially unusable. To avoid risk of
injury, occupants should only use seating positions where they are able
to be properly restrained.
2013 Flex (471)
Owners Guide gf, 1st Printing
USA (fus)
Child Safety
10. Before placing the child in the
seat, forcibly move the seat forward
and back to make sure the seat is
securely held in place. To check
this, grab the seat at the belt path
and attempt to move it side to side
and forward and back. There should
be no more than 1 inch (2.5 cm) of
movement for proper installation.
I n f o r ma t i o n P r o v i d e d b y :
29

Advertisement

Table of Contents
loading

Table of Contents