SIIG UltraATA 133 PCI Quick Installation Manual page 5

2. Once Windows has been installed, right click My
Computer and click Properties. Select Device
Manager tab.
3. Double click PCI Mass Storage Controller listed
under Other Devices.
4. Select Driver tab, then click Update Driver button.
5. Insert the driver CD and click Next.
6. Select Search for a better driver ... and click Next.
7. Insert the driver CD, check specify location, uncheck
the other boxes, type D:\32bit (change D: to match
CD-ROM), then click Next.
8. Click Next, then Finish.
9. Remove the driver CD and restart Windows to
complete the driver installation.
For Existing Windows 98SE Installation
1. Install the board and boot up Windows 98SE.
2. At the Add New Hardware Wizard, click Next.
3. Select Search for the best driver for your device and
click Next.
4. Insert the driver CD, check specify location, uncheck
the other boxes, type D:\32bit (change D: to match
CD-ROM), then click Next.
5. Click Next, then Finish.
6. Remove the driver CD and restart Windows to
complete the driver installation.
Windows ME
For New Windows ME Installation
1. Install the board and follow Microsoft procedures
to install Windows ME accordingly.
5