SIIG UltraATA 133 PCI Quick Installation Manual page 12

4. Insert driver CD, then click Browse
5. Double click CD Drive (D:), (change D: to match
CD-ROM)
6. Highlight 32bit folder, then click OK
7. Select Silicon Image SiI 0680 ATA/133 Controller
(D:\32bit\SI680.inf), then click Next
8. Follow on-screen instructions to complete Windows
Vista installation.
For Existing 32-bit and 64-bit Vista Installation
1. Install the board and boot up Windows.
2. At the Found New Hardware Wizard, select Locate
and install driver software (Recommended), then
click Continue.
4 Insert the driver CD.
automatically.
3. Click Close, remove the driver CD and restart
Windows to complete the installation.
64-bit Windows Vista
For New Windows 64-bit Vista Installation
1. Install the board and follow Microsoft procedures
to install Windows accordingly.
2. Restart your system when prompted during
Windows' installation.
3. At Where do you want to install Windows?, click
Load Driver.
4. Insert driver CD, then click Browse.
5. Double click CD Drive (D:), (change D: to match
CD-ROM)
6. Double click 64bit folder, highlight AMD64, then
click OK.
12
The driver will install