This Document Is The Sole And Exclusive Property Of Wavecom. Not To Be Distributed Or Divulged Without Prior Written; Agreement - Wavecom Integra M2106+ Product Specification

6.5.3.3 Checking Wireless CPU
®
To check Wireless CPU
5. Make sure a valid SIM card is previously inserted in the Wireless CPU
6. Enter the AT+CREG? command by using communication software such as the HyperTerminal
program, The value appears as a response.
7. Check the result by comparing it with the values listed in the table below.
Value*
* Refer to the AT commands Interface Guide documentation [7] for further information
about the other returned values and their meaning.
®
If the Wireless CPU is not registered, perform the following procedure:
• Check the connection between the Wireless CPU
• Check signal strength to determine the strength of the received signal (refer to section 6.5.3.2).
©Confidential

This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without prior written

agreement.

WA_DEV_M2106+_PTS_003-001
Network Registration
®
network registration:
Network registration values
0,1
0,5
Using the Integra Wireless CPU
Network registration
Yes
Yes (registered roaming)
®
and the antenna.
Integra M2106+
®
SIM card holder.
Page: 67 / 77
April, 2007
®