8 Annexes
8.1
Supplier Information
8.1.1
General Purpose Connector
The mating connector for the Integra M2106+ Wireless CPU
SAMTEC France (http://www.samtec.com/).
Many SAMTEC products are available via SAMTEC dealers throughout the world.
For better fastening of the M2106+ on the application, Wavecom recommends the use of a low-profile
connector.
Figure 25: Flexible flat cable (Part number: FFSD-20-S-10-01-N)
Figure 26: Flex cable connector (Part number: FLE 125 01LDVA)
©Confidential
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without prior written
agreement.
WA_DEV_M2106+_PTS_003-001
Figure 24: High and low profile CLP connectors
Erreur ! Style non défini.
®
General Purpose Connector is made by
Integra M2106+
Page: 73 / 77
April, 2007