Troubleshooting; Not Connecting Through The Serial Link; This Document Is The Sole And Exclusive Property Of Wavecom. Not To Be Distributed Or Divulged Without Prior Written; Agreement - Wavecom Integra M2106+ Product Specification

7 Troubleshooting

This section describes:
• Problems that may be encountered when using the Integra Wireless CPU
• Possible causes
• Possible solutions
To review other troubleshooting information, refer to the 'FAQs' (Frequently Asked Questions) page either at
www.wavecom.com or use the following link:
7.1

Not Connecting Through the Serial Link

®
If the Wireless CPU does not answer through the serial link on attempted transmission of data, refer to the
table below for possible causes and solutions:
Table 5: Solutions for no connection through the serial link
If the Wireless CPU
returns:
Nothing
©Confidential

This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without prior written

agreement.

WA_DEV_M2106+_PTS_003-001
http://www.wavecom.com/modules/movie/scenes/support/
®
Then ask:
Is the Wireless CPU
powered?
Is the serial cable correctly
connected to the Wireless CPU
and PC sockets?
Is the communication program
correctly configured?
Is there another program
interfering with the
communication program?
Corrective Action:
®
correctly Provide a power supply to the
Wireless CPU
®
Connect the cable.
Ensure the following Wireless CPU
settings:
• Data bits = 8
• Parity = none
• Stop bits = 1
• Baud = 9600 bps
Close the application in conflict on the
communication port (e.g. mouse or
Integra M2106+
Erreur ! Style non défini.
®
®
.
®
printer driver)
Page: 68 / 77
April, 2007