Alliance Laundry Systems UM202 Series Installation Operation & Maintenance
Alliance Laundry Systems UM202 Series Installation Operation & Maintenance

Alliance Laundry Systems UM202 Series Installation Operation & Maintenance

Top loading

Advertisement

Washer-Extractor
Top Loading
UM202
Design 2 Models
CAR2C
CAR2C
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
Part No. F232212R2
www.comlaundry.com
July 2008

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UM202 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Alliance Laundry Systems UM202 Series

  • Page 1 Washer-Extractor Top Loading UM202 Design 2 Models CAR2C CAR2C Keep These Instructions for Future Reference. (If this machine changes ownership, this manual must accompany machine.) Part No. F232212R2 www.comlaundry.com July 2008...
  • Page 3: Table Of Contents

    All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher. F232212 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 4: Model Identification

    The nameplate decal is located at the rear of the Wisconsin U.S.A. machine. Always provide the machine’s serial number and model number when ordering parts or when seeking technical assistance. CAR2C CAR2C Nameplate Figure 1 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232212...
  • Page 5 Conforms To ANSI/UL Std. 1206, 4th Ed Certified To CAN/CSA Std. C22.2 No. 53-1968 Certified for use in wet locations EXAMPLE OF NAMEPLATE CAR17N CAR17N Figure 2 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232212...
  • Page 6: Safety Information

    7. Before the washer is removed from service or discarded, remove the door to the extract compartment. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232212...
  • Page 7 18. Keep washer in good condition. Bumping or dropping the washer can damage safety features. If this occurs, have washer checked by a qualified service person. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232212...
  • Page 8: Safety Decals

    Machine is not connected to a properly manufacturer immediately. grounded circuit. Use manufacturer-authorized spare parts to avoid Do not bypass any safety devices in the machine. safety hazards. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232212...
  • Page 9: Specifications And Dimensions

    Water inlet connection size, in. (mm) 0.75NH (G0.75) Number of water inlets (1 hot, 2 cold) Inlet flow capacity, gallons (liters) per min. 23 (87) Table 1 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232212...
  • Page 10 11.75 in. (298 mm) 18.38 in. (467 mm) 22.25 in. (565 mm) 16.5 in. (419 mm) 29.5 in. (749 mm) 19.88 in. (505 mm) 40.5 in. (1029 mm) Table 2 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232212...
  • Page 11 Specifications and Dimensions CAR2N Faucet Extractor Basket Agitator Control Panel Figure 3 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232212...
  • Page 12 60 in. (98 mm) (248 mm) (1524 mm) 29.5 in. (749 mm) CAR3N Cold Water Inlets Drain Outlet Electrical Connection Hot Water Inlet Overflow Level Figure 4 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232212...
  • Page 13: Installation

    Refer to Table 3 for static loads on the floor. Floor Load Data Specification Static floor load 840 lbs. (3.7 kN) Static pressure 68 lbs-ft (3.3 kN-m Table 3 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232212...
  • Page 14: Electrical Installation

    Use liquid tight conduit and connectors. NOTE: Machine has passed rain test and is certified for use in wet locations. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232212...
  • Page 15 Without proper grounding, personal injury from electric shock could occur and machine malfunctions may be evident. SW008 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232212...
  • Page 16: Drain Connection

    3 in. (76 mm) 4 in. (102 mm) 4 in. (102 mm) 4 in. (102 mm) 4 in. (102 mm) 7 – 10 6 in. (152 mm) Table 5 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232212...
  • Page 17: Water Connection

    Each hose is connected to a hot or cold water faucet with a 0.75 inch hose bib. Install vacuum breakers and check valves when required by local codes. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232212...
  • Page 18: Control Function Test

    If rotation is not clockwise in the extract step, disconnect power and have a qualified electrician reverse lines L1 and L2 at power input block. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232212...
  • Page 19: Operation

    The rinse will begin 30 seconds after basket begins to The LID LOCK indicator light indicates when the spin lid is properly closed on the extract-rinse compartment. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232212...
  • Page 20: Operating Instructions

    4. Add detergent and bleach, if desired, to water. Use ONLY liquid bleach. 5. Set wash timer for 30 seconds to begin filling tub and allow detergent/bleach to mix. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232212...
  • Page 21 3 min. Drapes 5 min. 5 min. 3 min. Uniforms 8 min. 4 min. 2 min. NOTE: Each compartment has a 12 pound dry weight capacity. Table 7 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232212...
  • Page 22 Refer to Figure 15. Refer to Table 7 for then press LID RELEASE button to open lid. recommended rinse and extract times. Refer to Figure 15. 12. Remove washables. CAR16N Drain Figure 15 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232212...
  • Page 23: Maintenance

    If used or handled improperly, they can be hazardous. Improper or incomplete service can also affect the machine and result in personal injury, or damage to the machine and may void the warranty. W357 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232212...
  • Page 24: Care Of Stainless Steel

    Tip: Paint all carbon steel parts with a heavy protective coating. Stainless steel fasteners should be used whenever possible. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232212...

Table of Contents