Alliance Laundry Systems WB2 350B Series Installation & Maintenance
  1. Manuals
  2. Brands
  3. Alliance Laundry Systems Manuals
  4. Washer
  5. WB2 350B Series
  6. Installation & maintenance
Alliance Laundry Systems WB2 350B Series Installation & Maintenance

Alliance Laundry Systems WB2 350B Series Installation & Maintenance

Barrier washer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Washer-Extractors
Barrier Washer
Refer to Page 15 for Model Identification
Original Instructions
Keep These Instructions for Future Reference.
CAUTION: Read the instructions before using the machine.
(If this machine changes ownership, this manual must accompany machine.)
Part No. D2615ENR1
www.alliancelaundry.com
January 2023

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WB2 350B Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Alliance Laundry Systems WB2 350B Series

Summary of Contents for Alliance Laundry Systems WB2 350B Series

  • Page 1 Washer-Extractors Barrier Washer Refer to Page 15 for Model Identification Original Instructions Keep These Instructions for Future Reference. CAUTION: Read the instructions before using the machine. (If this machine changes ownership, this manual must accompany machine.) Part No. D2615ENR1 www.alliancelaundry.com January 2023...

  • Page 3: Table Of Contents

    Electrical Specifications................51 © Copyright 2023, Alliance Laundry Systems LLC All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher.
  • Page 4 Possibility of the Machine Disposal by the Specialized Company....65 Possibility of the Machine Liquidation by Own Potential......65 China Restriction of hazardous substances (RoHS)....... 66 © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 5: Safety Information

    Important Safety Instructions WARNING Read all the instructions before using the ma- chine. Safe these Instructions for future reference. Install ‐ Maintenance prevention © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...
  • Page 6 This could result in serious injury and machine damage. © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...
  • Page 7 The steam supply must be turned off and allow the pipe, con- nections and components to cool before the pipe can be touched. © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...
  • Page 8 Avoid ac- cess of any person in the front or behind the ma- chine during its tilting action. © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...
  • Page 9 • Always follow the fabric care instructions supplied by the tex- must comply with local codes and be made by licensed per- tile manufacturer. © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 10: Safety Precautions

    • The use of hypochlorite will cause corrosion which may cause component failure under certain circumstances. © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...
  • Page 11 Otherwise, the supplier and manufac- turer are not responsible for potential injuries to operators or for any damages. Interventions in the appliance execution or © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...
  • Page 12 Before the appliance is removed from service or discarded, remove the door. C008 • Any Water or Steam Leaks Must Be Repaired Immediately. Closed supply immediately. © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...
  • Page 13 Do not allow children to play on, in or around the ap- C229 pliance at any time. Close supervision of children. C188 © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...
  • Page 14 Before each wash cycle, verify if the Soap Dis- penser lid is closed rigidly. Do not use the Soap Dis- penser Cups for something else than for what they are intended. © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 15: Introduction

    SMB500_QUANTUM_TOUCH IMU500V PMU500V SMU500V UMU500V SMB700_QUANTUM_TOUCH IMU700V PMU700V SMU700V UMU700V UMB360_UNILINC_TOUCH IMY360V PMY360V SMY360V UMY360V UMB500_UNILINC_TOUCH IMY500V PMY500V SMY500V UMY500V UMB700_UNILINC_TOUCH IMY700V PMY700V SMY700V UMY700V © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 16: Serial Plate Location

    2023 2024 Table 1 Figure 2 2. From the Diagnostics, select Machine ID. The display includes Front-End Control Software Version and I/O Board Software version. © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 17: Delivery Inspection

    For technical assistance, contact your local distributor or contact: Alliance Laundry Systems Shepard Street P.O. Box 990 Ripon, Wisconsin 54971-0990 U.S.A. www.alliancelaundry.com Phone: +1(920)748-3121 Ripon, Wisconsin © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 18: Specification And Dimensions

    Minimum and Maximum Steam pres- 15 - 116 [1 - 8] sure, PSI [bar] Connection Water valves connection, BSP male, 3 x 1, DN25 (in.) Table 3  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...
  • Page 19 Relative humidity 30% to 90% without condensation Height above sea level, ft [m] to 3281 [1000] Storage temperature and shipment, °F 34-131 [1-55] [°C] Table 3 © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 20: Machine Dimensions

    7. Steam Outlet Connection (Steam Exchanger (optional) - used for Indirect Steam Heating option if selected), 36 kg / 360 L Mod- 8. T and U - Load Insertion opening dimensions refer to Table 4 Figure 4 © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...
  • Page 21 ø 2.99 [76] ø 2.99 [76] maximum 19.68 [500] 3.35 [85] 3.35 [85] 5.19 [132] 5.19 [132] 15.59 [396] 15.59 [396] 23.62 [600] 23.62 [600] Table 4 © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...
  • Page 22 36 kg / 360 L and 50 kg / 500 L Models Unloading Side (Clean Side) 1. Emergency Stop 2. Control Panel with Second Display (optional) 3. Confirm Button Figure 5 © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...
  • Page 23 C-CZB33N_SVG 1. Emergency Stop 2. Control Panel 3. Drain Outlet Bottom (optional) 4. Drain Outlet Side (optional) 5. Water Tap 6. Soap Hopper Figure 6 © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...
  • Page 24 12 [305] 3.85 [98] 25 [635] 80 [2032] 85.11 [2162] 30 [762] 11.81 [300] ø 2.99 [76] maximum 19.68 [500] 3.34 [85] 5.19 [132] Table 5 © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...
  • Page 25 70 kg / 700 L Models Unloading Side (Clean Side) C-CZB8N 1. Emergency Stop 2. Control Panel with Second Display (optional) 3. Confirm Button Figure 7 © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...
  • Page 26 6. PC Programming Connection 7. Switch: Steam / Electric Heating 8. Serial Plate 9. Electrical Signals Liquid Soap Cover 10. Electrical Components with Frequency Inverter Cover Figure 8 © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...
  • Page 27 37.59 [955] 90 [2286] 90 [2286] 90 [2286] 25.70 [653] 25.70 [653] 25.70 [653] 4.25 [108] 4.25 [108] 4.25 [108] 155° 155° 155° Table 6 © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...
  • Page 28 9. Drain Outlet (Side - optional) 10. Steam Outlet Connection (Steam Exchanger (optional) - used for Indirect Steam Heating option if selected), 36 kg / 360 L Mod- Figure 9 © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...
  • Page 29 ø 2.99 [76] ø 2.99 [76] ø 2.99 [76] 9.84 [250] 9.84 [250] 9.84 [250] 14.37 [365] 14.37 [365] 14.37 [365] 19.29 [490] 12.99 [330] Table 7 © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...
  • Page 30 10. Soap Hopper Ventilation 11. Steam Inlet 12. Soft Cold Water Inlet 13. Hot Water Inlet 14. Hard Cold Water Inlet 15. Tub Ventilation Figure 10 © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...
  • Page 31 8.46 [215] 8.46 [215] 22.05 [560] 22.05 [560] 25.98 [660] 25.98 [660] 29.92 [760] 29.92 [760] 36.02 [915] 36.02 [915] 11.02 [280] 11.02 [280] Table 8 © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...
  • Page 32 10. Soap Hopper Ventilation 11. Steam Inlet 12. Soft Cold Water Inlet 13. Hot Water Inlet 14. Hard Cold Water Inlet 15. Tub Ventilation Figure 11 © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...
  • Page 33 16.38 [416] 10.67 [271] 7.99 [203] 7.08 [180] 7.36 [187] 1.26 [32] 8.46 [215] 22.05 [560] 25.98 [660] 29.92 [760] 36.02 [915] 11.02 [280] Table 9 © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 34: Mounting Bolt Hole Location And Placement Into Hygienic Barrier

    Placement into Hygienic Barrier 1. Unloading Side ("Clean" Side) 2. Loading Side ("Dirty" Side) 3. Mounting Bolt Hole (3*, 3**) 4. Machine Footing Figure 12 © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...
  • Page 35 34.25 [870] 45.90 [1166] 64.25 [1632] * Anchoring with weighing system and with anchoring pads ** Anchoring with position pin for weighing system Table 10 © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 36: Installation

    1. All passages and spaces the machine has to be transported Figure 14 through at installation should be reasonably dimensioned to meet the height and width of the machine including the pack- age. © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...
  • Page 37 Installation 1. Center of gravity Location Figure 15 © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 38: Unpacking

    Re- delivered inside the machine drum. Refer to Unblocking of move these screws. Use the space between the machine and © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 39: Placement Into Hygienic Barrier With Guards (On Request)

    2. Fix the plaster cardboard to the wall by means of a thin-pro- cardboard layer of maximum width 3.94 in. [100 mm] . filed structure. © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...
  • Page 40 3. Fill up the gap between the machine and structure with foam rubber or any other compressible material, which will not af- fect the weighing process. © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 41: Machine Anchoring

    2. Install the weighing system to machine. Check the tightening of the nut (3). 3. Put the machine down and verify that the load applied to each sensor is within the specified range. © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 42: Machine Anchoring With Weighing System - Uneven Surfaces (On Request)

    2. Loosen the nut, refer to Figure 18 (3). Turn the leveling leg, refer to Figure 18 (2) in order to achieve the required posi- tion. 3. Tighten the nut, refer to Figure 18 (3). © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 43: Drain Connection

    2. Drain Outlet (Recycle Bottom - optional) 3. The drainage pipe should be located over a floor drain, drain- 3. Clamp age channel. 4. Waste pipeline Figure 21 © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 44: Side Drain (On Request)

    2. Drain Outlet (Recycle Side - optional) Table 18 3. Clamp 4. Waste pipeline Figure 22 Drain Channel-pipe CZB22N 1. Vent 2. Flow Figure 23 © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 45: Water Connection Requirements

    If a hard water supply is not present, connect it with soft cold water. If no hot water supply is present, contact your dealer for the proper required action. © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 46: Connecting Hoses

    Therefore the temperature control of the washing bath is not very precise. In principle, the manufacturer strives that the real temperature in- side the washer is never higher than the programmed temperature © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 47: Bath Sample Tap

    4. Close the bath sample tap. and troubleshooting. Disconnect power from the ma- chine before removing any cover and guards, and before attempting any service procedures. W736 © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 48: Residual Current Device - Rcd

    Figure 28 Models outside of North America: For electrical protection, if re- IMPORTANT: Alliance Laundry Systems warranty does quired by local regulations, there must be installed a residual cur- not cover components that fail as a result of improper rent device (RCD) and a circuit breaker in the electrical installa- input voltage.

  • Page 49: Supply Protection Device

    7. Connect the supply cable conductors to the incoming termi- nals (main switch (1)) marked with L1/U, (L2/V), (L3/W) and Figure 30 the terminal (copper screw) marked with PE. Refer to Figure 30 . © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 50: Determining Awg Sizes

    [4 mm²] we recommend to select a larger 4. Protective conductor - washing machine connection conductor section, i.e. 0.009 ft [6 mm²] . 5. Earth mark Figure 31 © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 51: Electrical Specifications

    (Hz) Phase Wire (kW) (kW) 200-240 50/60 3 (L1, L2, 25.5 380-415 50/60 3 (L1, L2, 14.5 440-480 50/60 3 (L1, L2, 14.5 Table 23 © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...
  • Page 52 Fuse (Hz) Phase Wire (kW) (kW) 200-240 50/60 3 (L1, L2, 380-415 50/60 3 (L1, L2, 15.5 440-480 50/60 3 (L1, L2, 15.5 Table 24 © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 53: Input Power Conditioning

    W810 IMPORTANT: All quick disconnects should comply with the specifications. DO NOT use fuses instead of circuit breakers. © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 54: Connection Specifications

    Specification Model Requirement C200 Press air connection 0.315 [8] size, in. [mm] Air pressure, PSI 43 - 73 [3 - 5] [bar] Table 27  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 55: Venting

    IMPORTANT: Start pumping immediately after the wa- ter valves are open. The incoming water dilutes the liq- uid soap and brings it into the tub assembly. © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 56: Electrical Connection Of The Liquid Soap Supply System

    "P" (screw clamps), fix up the cable by tightening the cable bushing) against disconnection and close the box with the cover. For details about © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 57: Chemical Injection Suppy System

    Failure to fol- low these instructions could damage the machine and void the warranty. Figure 36 shows a typical chemical injection supply system. © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 58: Maintenance

    5. At the end of the working day, open the machine door to al- low airing out the machine and to prolong the door gasket life © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 59: Safety Vibration Switch

    Refer to Table 28 for the opti- Figure 38 mum distance. To adjust the vibration switches: 1. Dismantle the top cover of the washing machine. © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...
  • Page 60 Refer to Table 29 for the opti- mum distance. To adjust the vibration switches: 1. Dismantle the top cover of the washing machine. © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 61: Spring Unit

    After first 24 hours of operation. • After first 80 hours of operation. • Every 6 months or every 1000 operation hours - which ever comes first. © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 62: Lubrication

    Alvania EP2 LF (SHELL), Beacon EP2 (ESSO) cles in the water line. The standard location of lubrication points on the upper panel. Refer to Figure 42 . © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 63: Tightening Moments

    NO case a higher value. If the fuse blows again, do not change it, but find the cause of the failure. Contact your com- mercial distributor for help if necessary. © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 64: Troubleshooting

    Heating element • V-belts • Door seal Find more detailed information and order codes in the spare parts catalogue for individual machines at your dealer. © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 65: Disposal Of Unit

    These systems reuse or recycle most of the components. • The symbol “crossed out bin on wheels ( )” invites you to make use of these systems. o If you wish more information © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

  • Page 66: China Restriction Of Hazardous Substances (Rohs)

    NOTE: The referenced Environmental Protection Use Period Marking was determined according to normal oper- ating use conditions of the product such as temperature and humidity. This product under normal use, durable years of environmental protection is 15 years. © Copyright, Alliance Laundry Systems LLC - Part No. D2615ENR1 DO NOT COPY or TRANSMIT...

This manual is also suitable for:

Wb360bWb500bImb500 evolis eliteImb700 evolis eliteMxb360 x control flex plusMxb500 x control flex plus ... Show all

Table of Contents