Alliance Laundry Systems CCN020HNF Original Instructions Manual
  1. Manuals
  2. Brands
  3. Alliance Laundry Systems Manuals
  4. Washer
  5. CCN020HNF
  6. Original instructions manual
Alliance Laundry Systems CCN020HNF Original Instructions Manual

Alliance Laundry Systems CCN020HNF Original Instructions Manual

Hide thumbs Also See for CCN020HNF:
Table of Contents

Advertisement

Quick Links

Washer-Extractor
Refer to Page 7 for Model Numbers
CHM1311R_SVG
Original Instructions
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
Part No. F8237801ENR13
www.alliancelaundry.com
March 2017

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CCN020HNF and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Alliance Laundry Systems CCN020HNF

Summary of Contents for Alliance Laundry Systems CCN020HNF

  • Page 1 Washer-Extractor Refer to Page 7 for Model Numbers CHM1311R_SVG Original Instructions Keep These Instructions for Future Reference. (If this machine changes ownership, this manual must accompany machine.) Part No. F8237801ENR13 www.alliancelaundry.com March 2017...
  • Page 3 Any problems or conditions not understood should be reported to the dealer, distributor, service agent or the manufacturer. © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 4: Table Of Contents

    Power Save Mode..................13 © Copyright 2017, Alliance Laundry Systems LLC All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher.
  • Page 5 Testing Machine and Electronic Control Functions....... 42 How to Enter Diagnostic Testing Feature............42 How to Start Tests..................42 How to Exit Diagnostic Testing Feature............42 Diagnostic Test Descriptions................43 Error Codes..................47 © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 6 How to Use Rapid Advance................50 How to Exit Rapid Advance Feature............... 50 Communications Mode................. 51 Infra-red Communications................51 How to Begin Communications with an External Device......51 Default Cycles..................52 © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 7: Model Identification

    100 Pound CCN100HNF HCL100HNF HCU100HNV UCH100HNV UCN100HNV CCN100HNV HCL100HNV ICN100HNF UCL100HNF UCU100HNF HCH100HNF HCN100HNF ICN100HNV UCL100HNV UCU100HNV HCH100HNV HCN100HNV UCH100HNF UCN100HNF UCY100HNF 125 Pound UCL125HNV UCU125HNV © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 8: Introduction

    For technical assistance, contact your local distributor or contact: Alliance Laundry Systems Shepard Street P.O. Box 990 Ripon, WI 54971-0990 U.S.A. www.alliancelaundry.com Phone: +1 (920) 748-3121 Ripon, Wisconsin © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 9: Preliminary Information

    This control is an advanced, programmable computer that lets the software. Contact Alliance Laundry Systems for a list of ap- owner control most machine features by pressing a sequence of proved PDAs and other external devices.

  • Page 10: Control Identification

    5. START (enter) keypad 6. LED Light 7. Cycle Indicator Lights 8. LED Status Lights 9. Wash 10. Rinse 11. Spin 12. Door 13. Bleach Figure 1 © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 11: Display Identification

    During diagnostic testing or manual programming of the control, these digits will display descriptive codes and values (as described in Entering the Manual Mode). © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 12: Machine Operation

    LEDs are lit and the loading door is locked. Signals The options for when a signal can be used during the machine op- eration are listed below: © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 13: Special Features

    STOP keypad to end the cycle. © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 14: Opening The Top Cover

    2. Slide top cover forward slightly to move notches away from the pegs on the front of cabinet. CHM1357R_SVG 1. Top Cover Lock 2. Top Cover 3. Top Cover Hinge 4. Peg Figure 2 © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 15: Entering The Manual Mode

    Programming can only be turned on or off with an external de- entered. vice. Refer to the appropriate instruction manual. Manual Rapid Advance can be turned on and off using an external device or by © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 16: How To Exit Programming Feature

    Diagnostic Tests. Refer to Tests Diagnostic Tests flowchart. CHM1337R_SVG Figure 3 How to Exit Programming Feature Press the #5 (<) keypad until the control returns to Start Mode. © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 17: Programming Control

    Slow Drain Detection E Sd on/oFF Cycle Programming — CyC- Cycle Agitate — — AgIt Agitate Type tyPE Agitate Speed (VFD only) ASPd Lo/rEg Table 1  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 18 Compartment #3 (Design 2 on/oFF and 3 models) Compartment #4 (Design 2 on/oFF and 3 models) Supply #1 (Design 2 and 3 on/oFF models) Table 1  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 19 Cycle Time 0-255 minutes Cnin Supply/Compartment Dis- C (Compartment) C (Compartment) SUPC penser Programming (De- S (Supply Dispenser) sign 1 models only) Table 1  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 20 Slow Drain Detection Adjust 0* 0-255 seconds SdAd *Refer to programming section for value definition. **Refer to the Default Cycles for default cycle setting information. Table 1 © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 21: Programming Flowcharts

    “nEd” = Medium Level “Lo” = Low Level “tEnP” - Fill Temperature: “CoLd” = Cold “Uarn” = Warm “Hot” = Hot (continued) (continued) (continued) CHM1374R_SVG Figure 4 © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 22 5 = Very High Speed (150) 6 = Ultra High Speed (200) “Cnin” - Program Cycle Time “0” - “255” (in minutes) (continued) CHM1547R_SVG Figure 5 © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 23 “oFF” = Disabled “SdAd” - Enable/disable slow drain detection. When enabled can increase/decrease the time before a slow drain error will occur: 0-255 seconds CHM1395R_SVG Figure 6 © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 24: Diagnostics

    Drive Parameter Table Version Number “dPxx” (Design 2 and 3 Models) “d024” Drive Type Value “dt x” (Design 2 and 3 Models) CHM1548R_SVG Figure 7 © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 25: Default Cycle Dcyc

    Default Cycle (dCYC) Chart Default Value (Keypad) Cycle Type 90C Perm Press 60C Perm Press 40C Perm Press 70C Perm Press 50C Gentle 30C Gentle Table 2 © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 26: Audio Signal Aud

    Audio Signal (AUd) Chart Coin/Card In- Remove Card put (Not Start Mode (Not Used) Used) Signal Value (Not Used) End of Cycle Key Pressed Table 3  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 27 Coin/Card In- Remove Card put (Not Start Mode (Not Used) Used) Signal Value (Not Used) End of Cycle Key Pressed *Factory default setting Table 3 © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 28: Error Code Programming Err

    Unbalance Error Display (VFD models on- E Ub Open Thermistor Error Display E oP Shorted Thermistor Error Display E SH Heat Error Display (heater only) E Ht Table 4  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 29: Cycle Programming Cyc

    2. Press the #3 (∧) or the #6 (∨) keypad to change the current Action status. Table 5  continues... NOTE: If the Segment Enable/Disable is program- med oFF, the other Cycle Segment programming op- tions can’t be accessed. © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 30 2. Press the #3 (∧) or the #6 (∨) keypad to scroll through the pro- grammable Supply step options. Refer to Table 7 . © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 31 #5 (<) keypad first. To program other options, will appear in the display. press the #3 (∧) or the #6 (∨) keypads and refer to the appropriate section. © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 32 2 = Low (80) and 3-VFD only) 3 = Medium (100) 4 = High (125) 5 = Very high (150) 6 = Ultra high (200) Table 9 © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 33: Supply Compartment Dispenser Programming Supc (Design 1 Models Only)

    The current value will appear in the display. 5. Press the #3 (∧) or the #6 (∨) keypad to increase or decrease the current value. © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 34: Fahrenheit/Celsius T Fc

    FH, will appear in the display. NOTE: To program FH (Hot Water Temperature), re- fer to Hot Water Temperature FH. To program other op- tions, refer to the appropriate section. © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 35: Hot Water Temperature Fh

    4. When FHC appears in the display, press the START (enter) keypad. A number will appear in the display. This number corresponds to the current Warm Water Temperature value. © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 36: Cold Water Temperature Fc

    3. Press the #3 (∧) or the #6 (∨) keypad to scroll through the pro- grammable options until Codn appears in the display. © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 37: Production Test Cycle (Enable/Disable) Pten

    = Option Enabled (default setting) oFF = Option Disabled 5. Press the #3 (∧) or the #6 (∨) keypad to change the current status. © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 38: No Cycle Time Display Nctd

    6. Press the START (enter) keypad when the desired status ap- pears in the display. The next option, SdAd, will appear in the display. © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 39: Slow Drain Detection Adjust Value Sdad

    The next option, dCyC , will appear in the display. NOTE: To program dCyC (Default Cycle), refer to De- fault Cycle dCYC. To program other options, refer to the appropriate section. © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 40: Collecting Audit Information

    Audit Options List. 4. To select other audit options, repeat steps 1–4. How to Exit Audit Feature Press the #5 (<) keypad. © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 41: Manual Reset

    3. Press the START (enter) keypad. The control will be blank until the programming is complete. Once the program has been reset, the control will display the next Manual Mode op- tion, dIAg. © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 42: Testing Machine And Electronic Control Functions

    Drive Parameter Table Version Number d023 (Design 2 and 3 models only) dPxx Drive Type Value d024 (Design 2 and 3 models only) dt x Table 11 © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 43: Diagnostic Test Descriptions

    To exit the Custom Drive Software Version Number Test, press This option empties all water from the machine. the #5 (<) keypad. The control will return to the Diagnostic Test- ing Mode. © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 44 Drain or pump drAn or PUnP Temp Sensor Step skipped if not equipped with temp tEnP sensor. Heater Step skipped if not heater-equipped. HEAt Table 14  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 45 This step skip- temperature pending on the Fahrenheit/Celsius pro- ped if not heat model. Heater turned off gramming parameter when temperature reached. Table 14  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 46 F-speed models. Extract Speed #6 “ultra high” Design 2 and 3 models only. SP 6 End of Test Turn power off. Prdn Table 14 © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 47: Error Codes

    Machine not drained within 15 minutes (or other programmed E dr length of time) in any drain step. End cycle. Power down ma- chine to clear. Table 15  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 48 Power down, verify H3 on drive and tachometer connections on motor, power up and try again. Table 15  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 49 *To clear the decimal point on display, press the START (enter) keypad 3 times in succession (within 5 seconds). **Design 2 and 3 models only. Table 15 © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 50: Rapid Advance Feature

    NOTE: The Manual Rapid Advance option must be turned on for Rapid Advance to work. Refer to Manual Rapid Advance (Enable/Disable) rAEn in Programming Con- trol. © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 51: Communications Mode

    EIxx (xx represents the error code). NOTE: The Infra-red Communications option must be turned on. Refer to IR Access (Enable/Disable) IrA in Pro- gramming the Control. © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

  • Page 52: Default Cycles

    C1, C2 C1, C2 C1, C2 C1, C2 C1, C2 (S1) (S1) (S1) (S1) (S1) (S1) Heat (if enabled) Drain Spin (min.) Table 16  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 53 C1, C2, C1, C2, C1, C2, C1, C2, C1, C2 Heat (if enabled) Drain Spin (min.) Rinse 1 (ON/OFF) Time for agitation (min.) Table 16  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 54 1 (High) speed) Rinse 3 (ON/OFF) Time for agitation (min.) Fill Temperature Cold Cold Cold Cold Cold Cold Cold Cold Cold Fill Level Table 16  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 55 3: Ul- and 3: Ul- tra High) tra High) tra High) tra High) tra High) tra High) tra High) tra High) Table 16  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 56 Wash 1 (ON/OFF) Time for agitation (min.) Fill Temperature Warm Warm Warm Warm Warm Warm Warm Warm Cold Fill Level High Supply Table 17  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 57 Heat (if enabled) Drain Spin (min.) Wash 4 (ON/OFF) Time for agitation (min.) Fill Temperature Cold Cold Cold Cold Cold Cold Cold Cold Cold Table 17  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 58 1 (High) 1 (High) 1 (High) 1 (High) 1 (High) 1 (High) 1 (High) 1 (Low) 1 (Low) speed) Rinse 3 (ON/OFF) Table 17  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 59 3: Ul- and 3: Ul- and 3: Ul- tra High) tra High) tra High) tra High) tra High) tra High) tra High) Table 17  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 60 8 Nor- 8 Nor- 8 Nor- 3/12/3 Agitation type Gentle Wash 1 (ON/OFF) Time for agitation (min.) Fill Temperature Fill Level Supply Table 18  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 61 Spin (min.) Wash 3 (ON/OFF) Time for agitation (min.) Fill Temperature Fill Level Supply Heat (if enabled) Drain Spin (min.) Wash 4 (ON/OFF) Table 18  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 62 Fill Temperature Fill Level Supply Heat (if enabled) Drain Spin (min.) Rinse 2 (ON/OFF) Time for agitation (min.) Fill Temperature Fill Level Supply Table 18  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 63 Heat (if enabled) Drain Spin (min.) Rinse 4 (ON/OFF) Time for agitation (min.) Fill Temperature Fill Level Supply Heat (if enabled) Drain Spin (min.) Table 18  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 64 Fill Temperature Fill Level Supply Heat (if enabled) Drain Spin (min.) Wash 2 (ON/OFF) Time for agitation (min.) Fill Temperature Fill Level Supply Table 18  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 65 Spin (min.) Wash 4 (ON/OFF) Time for agitation (min.) Fill Temperature Fill Level Supply Heat (if enabled) Drain Spin (min.) Rinse 1 (ON/OFF) Table 18  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 66 Fill Temperature Fill Level Supply Heat (if enabled) Drain Spin (min.) Rinse 3 (ON/OFF) Time for agitation (min.) Fill Temperature Fill Level Supply Table 18  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 67 F and V- Time speed (hh:mm:s (Design F and V- speed (Design 2 and 3) Wash 1 (ON/OFF) Time for agitation (min.) Table 18  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 68 Supply Heat (if enabled) Drain Spin (min.) Wash 3 (ON/OFF) Time for agitation (min.) Fill Temperature Fill Level Supply Heat (if enabled) Table 18  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 69 Spin (min.) Rinse 1 (ON/OFF) Time for agitation (min.) Fill Temperature Fill Level Supply Heat (if enabled) Drain Spin (min.) Rinse 2 (ON/OFF) Table 18  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 70 Fill Temperature Fill Level Supply Heat (if enabled) Drain Spin (min.) Rinse 4 (ON/OFF) Time for agitation (min.) Fill Temperature Fill Level Supply Table 18  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 71 Time for agitation (min.) Fill Temperature Fill Level Supply Heat (if enabled) Drain Spin (min.) Wash 2 (ON/OFF) Time for agitation (min.) Table 18  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 72 Supply Heat (if enabled) Drain Spin (min.) Wash 4 (ON/OFF) Time for agitation (min.) Fill Temperature Fill Level Supply Heat (if enabled) Table 18  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 73 Spin (min.) Rinse 2 (ON/OFF) Time for agitation (min.) Fill Temperature Fill Level Supply Heat (if enabled) Drain Spin (min.) Rinse 3 (ON/OFF) Table 18  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 74 Heat (if enabled) Drain Spin (min.) Rinse 4 (ON/OFF) Time for agitation (min.) Fill Temperature Fill Level Supply Heat (if enabled) Drain Spin (min.) Table 18  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...
  • Page 75 3/12/3 Agitation type Gentle Default 2 speed Cycle F and V- Time speed (hh:mm:s (Design F and V- speed (Design 2 and 3) Table 18 © Copyright, Alliance Laundry Systems LLC - Part No. F8237801ENR13 DO NOT COPY or TRANSMIT...

This manual is also suitable for:

Ccn020hnvHch020hnfHch020hnvHcl020hn2Hcl020hnfHcl020hnv ... Show all

Table of Contents