Alliance Laundry Systems PMC360T Installation Manual
  1. Manuals
  2. Brands
  3. Alliance Laundry Systems Manuals
  4. Washer
  5. PMC360T
  6. Installation manual
Alliance Laundry Systems PMC360T Installation Manual

Alliance Laundry Systems PMC360T Installation Manual

Washer-extractors
Hide thumbs
Table of Contents

Advertisement

Quick Links

Washer-Extractors
Barrier Washer
Refer to Page 11 for Model Identification
Original Instructions
Keep These Instructions for Future Reference.
CAUTION: Read the instructions before using the machine.
(If this machine changes ownership, this manual must accompany machine.)
Part No. D2269ENR6
www.alliancelaundry.com
April 2021

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PMC360T and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Alliance Laundry Systems PMC360T

Summary of Contents for Alliance Laundry Systems PMC360T

  • Page 1 Washer-Extractors Barrier Washer Refer to Page 11 for Model Identification Original Instructions Keep These Instructions for Future Reference. CAUTION: Read the instructions before using the machine. (If this machine changes ownership, this manual must accompany machine.) Part No. D2269ENR6 www.alliancelaundry.com April 2021...

  • Page 3: Safety Information

    Read all instructions before using the washer. times (preferably in a locked cabinet). • Install the washer according the INSTALLATION instruc- tions. Refer to the EARTHING instructions in the INSTAL- © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 4: Safety Precautions

    • Always follow the instructions and/or warnings that are stated on the fabrics, washing products or cleaning products men- tioned by the manufacturer. © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...
  • Page 5 Do not repair or replace any part of the appliance or attempt be used for this purpose. any servicing unless specifically recommended in the service manual or published user-repair instructions that you under- © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...
  • Page 6 C004 with all local and national codes. If more appliances in the same location, mutual grounding must be applied where possible. C181 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...
  • Page 7 It is up to the user to take proper C014 care when operating the appliance. C227 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 8: Table Of Contents

    Input Power Conditioning................49 © Copyright 2021, Alliance Laundry Systems LLC All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher.
  • Page 9 Disconnecting the Machine................67 Machine Disposal..................67 Possibility of the Machine Disposal by the Specialized Company....67 Possibility of the Machine Liquidation by Own Potential......67 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...
  • Page 10 China Restriction of hazardous substances (RoHS)....... 68 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 11: Introduction

    SMH500D MXB700_XCONTROL_PLUS IMB700_ARIES_ELITE SMH700D UMC360I SMC360D UMH360I UMC500I SMC500D UMH500I UMC700I SMC700D UMH700I UMY360I SMY360D UMY500I SMY500D UMY700I SMY700D UMB360_PROFORM SMB360_QED-SELECT UMB500_PROFORM SMB500_QED-SELECT UMB700_PROFORM SMB700_QED-SELECT © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 12: Serial Plate Location

    520I000001DK was manufactured in May 2015. Manufacturing Date - Year Year Serial Number Character 2009 2010 2011 2012 2013 2014 2015 2016 Table 1  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...
  • Page 13 N or Q August P or S September R or U October T or W November V or Y December X or Z Table 2 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 14: Delivery Inspection

    For technical assistance, contact your local distributor or contact: Alliance Laundry Systems Shepard Street P.O. Box 990 Ripon, Wisconsin 54971-0990 U.S.A. www.alliancelaundry.com Phone: +1(920)748-3121 Ripon, Wisconsin © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 15: Specification And Dimensions

    Water valves connection, BSP male, 3 x 1, DN25 (in.) Inlet flow capacity per inlet, gal/min 48.3 [183] at 14.5 PSI [l/min. at 1 bar]] Table 3  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...
  • Page 16 Relative humidity 30% to 90% without condensation Height above sea level, ft [m] to 3281 [1000] Storage temperature and shipment, °F 34-131 [1-55] [°C] Table 3 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 17: Machine Dimensions

    6. Soap Hopper 7. Steam Outlet Connection (Steam Exchanger (optional) - used for Indirect Steam Heating option if selected), 36 kg / 360 L Mod- Figure 2 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...
  • Page 18 66.77 [1696] 11.81 [300] 11.81 [300] ø 2.99 [ 76] ø 2.99 [76] maximum 19.68 [500] 3.35 [85] 3.35 [85] 5.19 [132] 5.19 [132] Table 4 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...
  • Page 19 36 kg / 360 L and 50 kg / 500 L Models Unloading Side (Clean Side) 1. Emergency Stop 2. Control Panel with Second Display (optional) 3. Confirm Button Figure 3 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...
  • Page 20 C-CZB33N_SVG 1. Emergency Stop 2. Control Panel 3. Drain Outlet Bottom (optional) 4. Drain Outlet Side (optional) 5. Water Tap 6. Soap Hopper Figure 4 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...
  • Page 21 12 [305] 3.85 [98] 25 [635] 80 [2032] 85.11 [2162] 30 [762] 11.81 [300] ø 2.99 [76] maximum 19.68 [500] 3.34 [85] 5.19 [132] Table 5 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...
  • Page 22 70 kg / 700 L Models Unloading Side (Clean Side) C-CZB8N 1. Emergency Stop 2. Control Panel with Second Display (optional) 3. Confirm Button Figure 5 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...
  • Page 23 6. PC Programming Connection 7. Switch: Steam / Electric Heating 8. Serial Plate 9. Electrical Signals Liquid Soap Cover 10. Electrical Components with Frequency Inverter Cover Figure 6 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...
  • Page 24 37.59 [955] 90 [2286] 90 [2286] 90 [2286] 25.70 [653] 25.70 [653] 25.70 [653] 4.25 [108] 4.25 [108] 4.25 [108] 155° 155° 155° Table 6 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...
  • Page 25 9. Drain Outlet (Side - optional) 10. Steam Outlet Connection (Steam Exchanger (optional) - used for Indirect Steam Heating option if selected), 36 kg / 360 L Mod- Figure 7 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...
  • Page 26 ø 2.99 [ 76] ø 2.99 [76] 9.84 [250] 9.84 [250] 9.84 [250] 14.37 [365] 14.37 [365] 14.37 [365] 19.29 [490] 12.99 [330] Table 7 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...
  • Page 27 10. Soap Hopper Ventilation 11. Steam Inlet 12. Soft Cold Water Inlet 13. Hot Water Inlet 14. Hard Cold Water Inlet 15. Tub Ventilation Figure 8 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...
  • Page 28 8.46 [215] 8.46 [215] 22.05 [560] 22.05 [560] 25.98 [660] 25.98 [660] 29.92 [760] 29.92 [760] 36.02 [915] 36.02 [915] 11.02 [280] 11.02 [280] Table 8 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...
  • Page 29 10. Soap Hopper Ventilation 11. Steam Inlet 12. Soft Cold Water Inlet 13. Hot Water Inlet 14. Hard Cold Water Inlet 15. Tub Ventilation Figure 9 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...
  • Page 30 16.38 [416] 10.67 [271] 7.99 [203] 7.08 [180] 7.36 [187] 1.26 [32] 8.46 [215] 22.05 [560] 25.98 [660] 29.92 [760] 36.02 [915] 11.02 [280] Table 9 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 31: Mounting Bolt Hole Location And Placement Into Hygienic Barrier

    Placement into Hygienic Barrier 1. Unloading Side ("Clean" Side) 2. Loading Side ("Dirty" Side) 3. Mounting Bolt Hole (3*, 3**) 4. Machine Footing Figure 10 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...
  • Page 32 34.25 [870] 45.90 [1166] 64.25 [1632] * Anchoring with weighing system and with anchoring pads ** Anchoring with position pin for weighing system Table 10 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 33: Installation

    1. All passages and spaces the machine has to be transported through at installation should be reasonably dimensioned to meet the height and width of the machine including the pack- age. © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 34: Unpacking

    4. Handle the machine carefully with a forklift or with a hand electrical distribution panel on the right side of the machine. pallet truck. Make sure the fork does not damage components © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 35: Placement Into Hygienic Barrier With Guards (On Request)

    2. Fix the plaster cardboard to the wall by means of a thin-pro- filed structure. © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 36: Machine Anchoring

    2. Install the weighing system to machine. Check the tightening of the nut (3). 3. Put the machine down and verify that the load applied to each sensor is within the specified range. © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 37: Machine Anchoring With Weighing System - Uneven Surfaces (On Request)

    2. Loosen the nut, refer to Figure 14 (3). Turn the leveling leg, refer to Figure 14 (2) in order to achieve the required posi- tion. 3. Tighten the nut, refer to Figure 14 (3). © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 38: Drain Connection

    2. Drain Outlet (Recycle Bottom - optional) 3. The drainage pipe should be located over a floor drain, drain- 3. Clamp age channel. 4. Waste pipeline Figure 17 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 39: Side Drain (On Request)

    2. Drain Outlet (Recycle Side - optional) Table 17 3. Clamp 4. Waste pipeline Figure 18 Drain Channel-pipe CZB22N 1. Vent 2. Flow Figure 19 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 40: Water Connection Requirements

    WARNING If the water pressure is below the min. value, the wash result can not be guaranteed for certain pro- gram. C235 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...
  • Page 41 There are a lot of things that have influence on the temperature measurement. Therefore the temperature control of the washing bath is not very precise. © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 42: Connecting Hoses

    3. Take the bath sample only while the drum is not turning and ing valve connections at rear of washer. the water is cold. © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 43: Connection Of The Ventilation Valve (Optional, Used For Indirect Steam Heating Option), 36 Kg / 360 L Models

    Disconnect power from the ma- al and local requirements. chine before removing any cover and guards, and before attempting any service procedures. W902 W736 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 44: Residual Current Device - Rcd

    Figure 25 • No plug or extension cords. The machine is intended to be IMPORTANT: Alliance Laundry Systems warranty does permanently connected to the electrical network. not cover components that fail as a result of improper Connection input voltage.

  • Page 45: Determining Awg Sizes

    16 mm² (AWG 5) 125A 100A 35 mm² (AWG 2) 25 mm² 160A 125A 50 mm (AWG 0) 35 mm (AWG 2) Table 20  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 46: Machine Protective Earth Connection And Equipotential Bonding

    1. Washing machine 2. Laundry protective earth connection 3. Washing machine external protective terminal 4. Protective conductor - washing machine connection 5. Earth mark Figure 28 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 47: Electrical Specifications

    (Hz) Phase Wire (kW) (kW) 200-240 50/60 3 (L1, L2, 25.5 380-415 50/60 3 (L1, L2, 14.5 440-480 50/60 3 (L1, L2, 14.5 Table 22 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...
  • Page 48 Fuse (Hz) Phase Wire (kW) (kW) 200-240 50/60 3 (L1, L2, 380-415 50/60 3 (L1, L2, 15.5 440-480 50/60 3 (L1, L2, 15.5 Table 23 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 49: Input Power Conditioning

    W810 IMPORTANT: All quick disconnects should comply with the specifications. DO NOT use fuses instead of circuit breakers. © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 50: Connection Specifications

    Specification Model Requirement C200 Press air connection 0.315 [8] size, in. [mm] Air pressure, PSI 43 - 73 [3 - 5] [bar] Table 26  continues... © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 51: Venting

    IMPORTANT: Start pumping immediately after the wa- ter valves are open. The incoming water dilutes the liq- uid soap and brings it into the tub assembly. © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 52: Electrical Connection Of The Liquid Soap Supply System

    ”, refer to Figure 32 . Such connection is possible only with machines which had been ordered with the option “Heating delay / waiting for detergent”. © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 53: Chemical Injection Suppy System

    For a detailed signal connection schematics see also the wiring low these instructions could damage the machine and void the diagram of the entire machine. The supply voltage must be in the © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...
  • Page 54 Figure 35 shows a typical chemical injection supply system. Chemical Injection Supply System CZB21N 1. Injection Point 2. Chemical Dispenser Pump Outlet 3. PVC Pipe Figure 35 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 55: Operation

    1:18-1:20, which is half drum load. bigger and smaller pieces of fabrics. © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 56: Placing The Laundry Into The Machine

    7. Open the upper part of the drum door into the uppermost posi- tion - you must overcome the force of its spring. Thus, the up- per part of door is secured. Figure 37 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 57: Add Detergent

    13. For machines with Pullman drums, load the second half of the time for washing and rinsing. load into the second compartment of the drum. Press the © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 58: Start The Washer

    • Red : the machine has terminated operation and the linen can be removed now (the “clean side” only) or the linen can be © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 59: Power Failure

    Before you open the door, make sure that the drum is completely still and that the water has drained from it. C233 C-CZB14N Figure 48 © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 60: Maintenance

    We recommend to shut off all electrical power inlets 5. Check water inlets for leaks. and main water inlets. © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 61: Safety Vibration Switch

    4. To verify the vibration switch’s functionality and positioning: 360MXB000015KM a. Insert approximately 10% of the wash load into the wash- 500MXB000014KM ing drum and start extraction mode. © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...
  • Page 62 Refer to Table 29 for the opti- mum distance. To adjust the vibration switches: 1. Dismantle the top cover of the washing machine. © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 63: Spring Unit

    After first 24 hours of operation. • After first 80 hours of operation. • Every 6 months or every 1000 operation hours - which ever comes first. © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 64: Lubrication

    Alvania EP2 LF (SHELL), Beacon EP2 (ESSO) cles in the water line. The standard location of lubrication points on the upper panel. Refer to Figure 55 . © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 65: Tightening Moments

    NO case a higher value. If the fuse blows again, do not change it, but find the cause of the failure. Contact your com- mercial distributor for help if necessary. © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 66: Troubleshooting

    Heating element • V-belts • Door seal Find more detailed information and order codes in the spare parts catalogue for individual machines at your dealer. © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

  • Page 67: Disposal Of Unit

    The symbol “crossed out bin on wheels ( )” invites you to make use of these systems. o If you wish more information concerning the systems for collection, reuse or recycling of © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...
  • Page 68 NOTE: The referenced Environmental Protection Use Period Marking was determined according to normal oper- ating use conditions of the product such as temperature and humidity. This product under normal use, durable years of environmental protection is 15 years. © Copyright, Alliance Laundry Systems LLC - Part No. D2269ENR6 DO NOT COPY or TRANSMIT...

This manual is also suitable for:

Imc360rImh360rPmc500tImc500rImh500rPmc700t ... Show all

Table of Contents