Attaching Inputs & Outputs - AMX Precis DSP Instruction Manual

Attaching Inputs & Outputs
Input and output connectors are the attachment points for source and destination devices that connect to
the system. Viewed from the rear of a Precis DSP enclosure, the inputs (for sources) are on the left side of
the enclosure, and the outputs (for destinations) are on the right side.
Precis DSP models have gold-plated RCA connectors for routing stereo audio. Each input and output
consists of a pair of connectors (left and right) with the number of the input/output between the two
connectors.
Before connecting all input and output cables, attach only the first two input and output pairs and execute
a test switch (see page 19).
When the test switch is successful, attach the rest of the input and output cables.
To attach RCA cables:
1.
Insert the RCA plugs into the input and output RCA jacks according to the labels on the enclosure
(FIG. 4).
FIG. 4
Insert RCA plugs into RCA jacks
The system is ready to apply power; see page 16.
Precis DSP Instruction Manual
Installation & Setup
15