Enclosure Hardware - AMX Precis DSP Instruction Manual

Overview & Specifications

Enclosure Hardware

Power indicator
Power receptacle
Power switch
Output connectors
Input connectors
CONTROL (RS-232) serial port
FIG. 1
Front & rear view of model FGP37-1818-00P
Enclosure Front
Precis DSP models come with a blank front panel and a power indicator in the upper right corner.
Enclosure Rear
Descriptions follow for the hardware on the rear of a Precis DSP.
CONTROL Serial (RS-232) Port
The Precis DSP has an RS-232 serial port (labeled CONTROL) for attaching a PC or other external
control device.
Power Receptacle & Specifications
The universal power receptacle is in the upper left hand corner on the rear of the enclosure (FIG. 1).
Maximum power specifications are on the power receptacle. The power receptacle accepts all major
international standard power sources. (A standard US power cord is included with all shipments within
the US.) Maximum power specifications are listed to the right of the power receptacle; the power
specifications are also in the table on page 9. Always use an earth-grounded power cord/system with the
Precis DSP.
Input & Output Connectors
Precis DSP models have gold-plated RCA connectors for routing audio. These connectors are the
attachment points for source and destination devices that connect to the system. Viewed from the rear of
the enclosure, the inputs (sources) are on the left side of the enclosure, and the outputs (destinations) are
on the right side of the enclosure.
For additional information on the input and output connectors in your system, including cabling
directions, see "Attaching Inputs & Outputs" on page 15.
System Serial Number
Viewed from the rear, the system's serial number is located to the left on the end of the enclosure. Before
installation, we recommend recording the system's serial number in an easily accessible location.
8 Precis DSP Instruction Manual