American Dynamics SpeedDome Optima LT Specifications page 17

Outdoor Mounts
c h o o s e a m o u N t o R a D a P t e R f o R a N y a P P L i c a t i o N *
mount
This mounting structure attaches directly
Short Wall Mount
to a flat wall. When used with the RHOWCA
with End Cap
corner bracket adapter or RHOWPA pole strap
Assembly
adapter it can be affixed to corners as well as
poles. A mounting cover conceals the mounting
plate for a more attractive appearance.
This mount attaches directly to a flat wall,
Long Wall Mount
positioning the dome away from the wall, so
with End Cap
that it can see over furniture, shelving and displays.
Assembly
When used with the RHOWCA corner bracket
adapter or RHOWPA pole strap adapter it
can be affixed to corners as well as poles.
A mounting cover conceals the mounting plate
for a more attractive appearance.
Outdoor This mount suspends an outdoor dome
housing from an outdoor ceiling or horizontal
Pendant
surface. It can be installed using either new or
Mount
existing 1.25" NPT threaded pipe or rigid
conduit up to 10 feet (3 meters) in length.
Over-the-Roof
This mount affixes directly to any wall,
Mount with
rooftop wall or parapet, positioning the dome
away from the wall, so that it can see over
End Cap
awnings, soffits and landscaping. Opposing
Assembly
wing brackets secure installation to the roof
surface, while allowing the pole to be
repositioned for easy service access.
Adapter
Corner
This adapter attaches the long and short wall
Bracket
mounts (RHOSW & RHOLW) to affix to
Adapter
outside corners. Powder-coated aluminum
construction ensures an extremely sturdy
installation.
This adapter attaches the long and short wall
Pole Strap
mounts (RHOSW & RHOLW) to outside
Adapter
corners. This kit contains stainless steel straps
that can be daisy-chained to accommodate
any size pole and all the necessary mounting
hardware.
Floor Adapter
This adapter installs the RHOTR over-the-
for RHOTR
roof mount on horizontal and vertical roof/
parapet surfaces. Multiple fastening positions
provide versatility for mounting on any
combination of surfaces and angles.
End Cap Assembly
This mounting assembly retrofits any existing
outdoor SpeedDome wall, pole, corner, or
over-the-roof mount to accommodate newer
outdoor housings. A modular design lets you
mount the housing to the end cap on the
ground, before installing it on the mounting
pole, making the process safe and easy.
* Not applicable to pressurized housings.
Product offerings and specifications are subject to change without notice. Actual products may vary
from photos. Not all products include all features. Availability varies by region; contact your sales rep.
o u t D o o r m o u n t i n g o p t i o n S
Description Compatibility Construction
SpeedDome
Ultra Series
SpeedDome
Ultra Series
SpeedDome
Ultra Series
SpeedDome
Ultra Series
o u t D o o r A D A p t e r o p t i o n S
Description Compatibility Construction
SpeedDome
Ultra Series
SpeedDome
Ultra Series
SpeedDome
Ultra Series
SpeedDome
Ultra Series
Adapters
&
Dimensions
Powder-coated
With dome installed
aluminum, ABS
366 x 218 x 282 mm
plastic and (14 x 9 x 11 in)
fiber-filled PVC
Powder-coated With dome installed
aluminum, ABS 366 x 218 x 587 mm
plastic and (14 x 9 x 23 in)
fiber-filled PVC
Powder-coated 115 x 120 x 120 mm
aluminum, ABS (4.5 x 5 x 5 in)
plastic
Powder-coated 1098 x 243 x 473 mm
aluminum, ABS (43 x 10 x 19 in)
plastic and
fiber-filled PVC
Dimensions
Powder-coated
185 x 210 x 125 mm
aluminum
(7 x 8 x 5 in)
138 x 79 x 27 mm
(5 x 3 x 1 in)
Powder-coated
Straps support
aluminum and
53 to 951 mm
stainless steel
(2 to 30 in)
pole diameter
369 x 240 x 240 mm
Powder-coated
(15 x 10 x 10 in)
aluminum
64 x 103 x 194 mm
Fiber-filled PVC
(3 x 4 x 8 in)
Weight model #
1.3 kg
rhoSW
(3 lbs)
rholW
1.7 kg
(3.9 lbs)
1.8 kg
rhopn
(4 lbs)
5.7 kg
rhotr
(12.7 lbs)
Weight model #
rhoWCA
.79 kg
(1.75 lbs)
.5 kg
(1.1 lbs)
rhoWpA
2.59 kg
rotrF
(5.75 lbs)
.32 kg
roenDC
(.7 lbs)
35
—
36