American Dynamics ADSDUPIHC Specifications

SpDome Ultra I_VS335_L.qxd
•
•
•
int B/W
2/19/04 3:31 PM
ADSDUPIHC
Indoor Dome Housing
ADSDUPIVRC
Vandal Resistant Indoor
Dome Housing
FEATURES
•
Reinforced high impact
design
•
Vandal resistant option
Compact, attractive design
Page 1
SpeedDome
INDOOR DOME HOUSING
The SpeedDome Ultra indoor dome housing allows
the SpeedDome Ultra dome to be installed indoors
using the same design as found in the SpeedDome
Ultra outdoor housing. It is available in standard and
vandal resistant options.
The housing is made of a reinforced fiberglass high
impact polycarbonate material along with a UV
stabilized trim ring and top cover. The bubble
assembly is affixed to the top via tamper-proof screws.
For applications where vandalism is a concern, a
vandal resistant model is available which includes an
aluminum sunshield cover and a high impact bubble
which meets ANSI-87.1 impact safety standards. For
additional protection a stainless steel bubble cage is
provided.
Four tamper-proof screws
with driver bit supplied
Simply add an interface board, plug in the video
Ceiling, pole, roof, wall and
cable, connect power and data, and install any
corner mounts available
SpeedDome Ultra. Diagnostic power and
communications LEDs confirm proper connection
and aid in troubleshooting. A variety of mounts
accommodate the housing, making it easy to install.
The housing supports both the RUPTB and RUIOB
dome bases (not included) and is supplied with either
a choice of a clear or smoked bubble.
Front side – Single sheet – Letter size – print 4/c
® Ultra
www.americandynamics.net