American Dynamics SpeedDome Optima LT Specifications page 14

c h o o s e a m o u N t o R a D a P t e R f o R a N y a P P L i c a t i o N
• Complete line of indoor and outdoor mounts to
suit any mounting requirement
• Compatible with SpeedDome Ultra and Optima
series, plus the Ultra Drone series
This Top Hat housing with trim ring and plastic
Top Hat Housing
base mounts directly to a ceiling or indoor
with Trim Ring
mounting structure. It is a metal enclosure that
houses the dome. The trim ring is slightly larger
so that it completely covers the Top Hat's metal
rim. The RHIUTH is plenum-rated
mount
This assembly allows the dome to be suspended
I-Beam Mount
from an I-beam; and includes a clamp, pipe tee
Assembly
nipple and flange. The clamp attaches to a 1.25"
pipe, provided by the customer, then affixes to
the pendant hardware. The housing or dome
assembly also mounts to the structure.
This mount suspends a SpeedDome Ultra or a
Indoor Pendant
SpeedDome Optima housing from a ceiling or
Mount
horizontal surface. It can be installed using either
1.25" NPT threaded pipe or rigid conduit, new
or existing, up to 10' (3 meters) in length.
Hard Ceiling
This bracket enables the Top Hat housing to be
Bracket recessed in the ceiling (requires RHIUTH Top
Hat). The bracket is mounted to the Top Hat
and installed in a hole cut in the ceiling — per-
fect for sheet rock, plaster or solid ceilings. The
hard ceiling bracket can be installed entirely from
below the ceiling; the installer will not have to
access the area above the ceiling to install it.
Used with the RHIUTH Top Hat, this bracket
Fixed Bracket
enables the housing to be recessed in the ceiling
or in a 2-foot drop ceiling tile. The bracket is
mounted to the Top Hat housing and installed in
a hole cut in the ceiling. The bracket distributes
the weight of the dome and Top Hat housing
across the T-bar framework of the ceiling. It is
also very useful for sheet rock, plaster, or solid
ceilings.
Adjustable Bracket
Used with the RHIUTH Top Hat, this bracket
enables the housing to be recessed in drop
ceilings that utilize anything other than 2-foot
grids. The bracket distributes the weight of the
dome and the Top Hat housing across the T-bar
framework of the ceiling and is adjustable from
632-1219 mm (24-48 in)
2' x 2' Tile Mount This mount enables the Top Hat housing to be
recessed in a 2' x 2' drop tile ceiling. The ceiling
tile is removed and the white tile mount is simply
dropped in its place. A Top Hat housing and
plastic base are included in the kit.
This mount enables the pendant mount to be
2' x 2' Tile Pendant
installed in a 2' x 2' drop tile ceiling. The Top
Mount
Hat housing/dome assembly also mounts to the
structure. The mounting kit includes a 2' x 2'
plate and pendant hardware. The plate attaches
to a 1.25" pipe, provided by the customer, then
affixes to the Top Hat housing/dome assembly.
If mounting a SpeedDome Optima with this
model, a RHOPN ceiling pendant mount kit is
required.
This mount enables the dome to be recessed
2' x 2' Tile Mount Plate
in a 2' x 2' drop tile ceiling. The ceiling tile is
removed and the tile mount is simply dropped
in its place.
www.americandynamics.net
• Lightweight and aesthetic
• Choose from a variety of ceiling, wall,
pendant, corner, pole and over-the-roof models
SpeedDome
i n D o o r m o u n t i n g o p t i o n S
Ultra Series
Description Compatibility Construction
SpeedDome
Ultra Series
SpeedDome
Ultra and Optima
SpeedDome
Ultra Series
SpeedDome
Ultra Series
SpeedDome
Ultra Series
SpeedDome
Ultra Series
SpeedDome
Ultra and Optima
SpeedDome
Optima Series
Product offerings and specifications are subject to change without notice. Actual products may vary
from photos. Not all products include all features. Availability varies by region; contact your sales rep.
• Ground-level assembly of
Galvanized steel 6 x 7 x 7 in
(157 x 175 x 175 mm)
Dimensions
Steel and 6 m [max.] x 293 x 127 mm
Galvanized steel (20 ft [max.] x 12 x 5 in)
115 x 120 x 120 mm
Powder-coated
(4 .5 x 5 x 5 in)
aluminum and
ABS plastic
Series
Galvanized steel 212 x 179 x 56 mm
(8 x 7 x 2 in)
Galvanized steel 180 x 632 x 100 mm
(7 x 24 x 4 in)
180 x 1219 x 100 mm
Galvanized steel
(7 x 48 x 4 in)
Powder-coated
190 x 607 x 607 mm
aluminum and
(7 x 24 x 24 in)
ABS plastic
Powder-coated
47 x 605 x 605 mm
aluminum and
(2 x 23 x 23 in)
Series
ABS plastic
47 x 605 x 605 mm
Painted aluminum
(2 x 23 x 23 in)
dome/housing/end-cap for safe and
efficient installations
rhiuth
1.7 lbs
(.77 kg)
Weight model #
2.9 kg rhiuibm
(6.4 lbs)
rhopn
1.8 kg
(4 lbs)
rhiuhC
.70 kg
(1.6 lbs)
1.8 kg rhiuFb
(4 lbs)
rhiuAb
2.3 kg
(5 lbs)
2.7 kg
rhiu2X2m
(6 lbs)
5.4 kg
rhiu2X2p
(12 lbs)
1.7 kg
rh 2 X 2
(3.8 lbs)