Cabling The Provider Unit; Figure 16. Rack Mount - Set In Rack; Figure 17. Connecting At-Mc605 Ethernet Port To An Internet Service Provider - Allied Telesis AT-MC605 Installation Manual

Overview
Cabling the
Provider Unit
42
3. Position the slider, as shown in Figure 16 and push into the chassis.

Figure 16. Rack Mount - Set in Rack

4. To connect the cables, see "Cabling the Provider Unit" on page 42.
To cable the Provider unit, perform the following steps:
1. Connect the ethernet cable from the ethernet port to the Service
Provider box (ISP) in your wiring closet, as shown in Figure 17.
Figure 17. Connecting AT-MC605 Ethernet Port to an Internet Service
M C R 1 2
1637
Internet
M C R 1 2
Provider
PO W ER
1591