Rack-Mounting The Provider Unit; Figure 14. Configuring At-Mc605 Ethernet Extender For Provider Mode; Figure 15. Rack Mount - Set On Slider - Allied Telesis AT-MC605 Installation Manual

Rack-Mounting
the Provider Unit
To install the Provider unit in an AT-MCR12 rackmount chassis, perform
the following steps:
1. Configure the right VDSL CONFIG switch (SCBR/PROV) to the SCBR
position as shown in Figure 14 , "Configuring AT-MC605 Ethernet
Extender for Provider Mode".

Figure 14. Configuring AT-MC605 Ethernet Extender for Provider Mode

2. Attach the unit to one of the sliders that holds the unit in the chassis, as
shown in Figure 15.

Figure 15. Rack Mount - Set on Slider

AT-MC605 VDSL Ethernet Extender Installation Guide
VDSL CONFIG
SCBR FAST NO LIMIT 6dB
PROV INTL RATE LIMIT 9dB
1589
1636
41