Memory Installation: Ddrii1/2 - Albatron KI690-AM2 User Manual

FAN Headers: CPUFAN, AUXFAN
There are two fan headers available for cooling fans. These cooling fans play an important role
in maintaining ambient temperatures in your system. The CPUFAN header is attached with a
CPU cooling fan. The AUXFAN header is attached with another cooling fan.
1
AUXFAN
Attention
You can avoid damaging your CPU due to high temperatures with
proper cooling equipment. It is recommended that attach a cooling fan
on top of your CPU. Use the CPUFAN header to attach the fan cord.
On most fan power cord, the black wire of the fan cable is the "ground"
and should be attached to pin-1 of the header.

Memory Installation: DDRII1/2

The KI690-AM2 provides two DDRII SO-DIMM sockets with Dual Channel Technology
supported. These two sockets allow you to install 200-pin, non-ECC & unbuffered DDR II 667/
533/ 400 SO-DIMMs, supporting to install a total memory capacity of 2 GB.
Pin
1 Ground
2 Power (+12V)
3 FAN RPM rate sense
CPUFAN
Smart Fan Control
4
Pin
1 Ground
1
2 Power (+12V)
3
7
Mainboard KI690-AM2
Assignment
Assignment
FAN RPM rate sense