Aiphone Standard (IP) System Setting Manual page 9

Title Sub title
Timer setting -
Remote site -
pilot call setting
Telephone -
setting (North
America only)
Video setting -
Item
Scan monitor: -
Switching
Contact output External sound source 1
External sound source 2
Door release -
Remote site master Normal/Priority/Urgent
call
Remote site door call Normal/Priority/Urgent
Remote site room Normal/Priority/Urgent
sub call
Remote site paging Normal/Priority/Urgent/
Broadcast
Remote site chime Zone name
Sound fi le name/sequence name Sound fi le: SF1 - SF15
Telephone -
connection
Called telephone 1/2/3
number
Call change time -
Telephone pass code -
Dial pause duration -
DTMF duration -
Waiting time for ring- -
back-tone
Telephone pass code -
input time
Dial-tone detecting -
time
Sound detection -
waiting time
Sound detection time -
Call detection time -
Detection setting
Frame Rate -
Quality -
Sub item
5 to 60 (sec.)
10 to 300 (sec.)
10 to 300 (sec.)
0 to 300 (sec.), (0: Released while
holding the Door release button
pressed.)
(Select one from the registered stations
in your site for each of "Normal", "Priority"
and "Urgent".)
(Select up to 20 stations from the
registered master stations in your site for
each of "Normal", "Priority" and "Urgent".)
(Select up to 20 stations from the
registered master stations in your site for
each of "Normal", "Priority" and "Urgent".)
(Select one from the registered zones in
your site for each of "Normal", "Priority",
"Urgent" and "Broadcast".)
(Select one from the registered zones in
your site for each of "Normal", "Priority"
and "Urgent".)
Sound sequence: SS1 - SS20
ON/OFF
(1 to 30 digit number can be set for each
by using "0 - 9", "," and " _ ".)
10 – 60 (sec.)
3 to 4 digit number
1 to 10 (sec.)
50 to 300 (msec.)
1 to 30 (sec.)
3 – 15 (sec.)
1 – 15 (sec.)
500 – 1500 (msec.)
300 – 1000 (msec.)
100 – 1000 (msec.)
ON/OFF
Dial-tone detection
Outgoing call tone Normal/Priority
detection priority
ON/OFF
Shorter ring-back-tone
Ring-back-tone detection time:
than previous one
0.5 - 10.5 (sec.)
ON/OFF
End of ring-back-tone
Waiting time for ring-back-tone:
0.5 - 10.5 (sec.)
Busy tone detection ON/OFF
Dial tone detection ON/OFF
ON/OFF
CPC signal detection
CPC signal detection time:
50 - 1000 (msec.)
Reverse polarity ON/OFF
detection
1/2/5/7.5/10/15 (fps)
Low, Middle, High, Excellent
Setting range
7 (sec.)
30 (sec.)
30 (sec.)
10 (sec.)
-
-
-
-
-
-
OFF
-
30 (sec.)
0000
1 (sec.)
80 (msec.)
15 (sec.)
3 (sec.)
5 (sec.)
500 (msec.)
300 (msec.)
200 (msec.)
ON
Normal
ON
0.5 (sec.)
ON
5.5 (sec.)
ON
ON
ON
250 (msec.)
ON
15 (fps)
Excellent
Default
9