Registering Areas And Remote Sites [System Setting - Area/Site Registration] Required; Registering Zones [System Setting - Zone Registration] - Aiphone Standard (IP) System Setting Manual

Registering areas and remote sites
[System setting – Area/Site registration]
Required
Register areas (for separating stations in your site) and/
or remote sites. The number to which a name is entered is
registered as an area or site number. Up to 99 areas and/or
sites (up to 31 for sites only) can be registered.
1
Click Area/Site registration in the table of contents.
2 Enter an area name in the cell for the area number 01.
Be sure to enter an area name. A site cannot be
*
registered to the number 01.
The fi gures under "Number" in the tables means the area
*
or site numbers.
3 Enter area and/or site names in the cells for other
numbers to register more areas and/or sites.
• Select "Area" or "Site" from the pull-down menu of "Area/
Site".
• For a site, enter the IP address (global IP address of the
target site), port number and connection password for
the target site.
• For a site, set "Door release" to enable (ON) or disable
(OFF) the door release action from the target site.
4
Click
Temporarily stored
results temporarily.
If you wish to cancel the setting results you have made,
*
click a title in the table of contents or "Refresh" in the
web browser menu.
NOTES:
Be sure to register at least one area to the area number 01.
•
("1" is entered in the cell for the area number 01 as default.)
A call number displayed on the master station monitor consists of
•
an area number plus a station number (when called from within
your site).
to save the current setting
Registering zones
[System setting – Zone registration]
Register zones for paging (transmitting announcements and
chime) in your site. The number to which a name is entered
is registered as a zone number. Up to 99 zones can be
registered.
* Zones are groups of stations designated for paging and chime
paging.
1
Click Zone registration in the table of contents.
2 Enter a zone name in the cell for the target zone
number.
The fi gures under "Number" in the table means the zone
*
number.
3
Enter zone names in the cells for other numbers to
register more zones.
4
Click
Temporarily stored
results temporarily.
If you wish to cancel the setting results you have made,
*
click a title in the table of contents or "Refresh" in the
web browser menu.
to save the current setting
21