E-Mail Setting; Downloading/Uploading Setting Data [Setting Fi Le]; When Downloading Setting Data Onto The Pc; When Uploading Setting Data - Aiphone Standard (IP) System Setting Manual

E-mail setting

You can send an e-mail when calling or send error messages
etc. by e-mail. Up to 3 mail addresses can be set.
NOTES:
Prepare an e-mail account for this function beforehand.
•
Make sure to enter the system name at
•
Individual] – [System name] to display the title with an e-mail.
Make sure to enter primary and/or secondary DNS server
•
information at [Network setting: Individual] (to all the IP units).
The body of the message is only in English.
•
1
Click E-mail setting in the table of contents.
2 Set the following settings.
• [Email destination address]:
Enter up to 3 mail addresses (destination addresses).
• [Email source address]:
Enter the source mail address.
• [SMTP authentication]:
Confi gure SMTP authentication as required by source
E-mail provider.
• [Mailing event]:
Select mailing events by setting the target ones to [ON].
3
Click
Temporarily stored
results temporarily.
If you wish to cancel the setting results you have made,
*
click a title in the table of contents or "Refresh" in the
web browser menu.
[Network setting:
to save the current setting
Downloading/uploading setting data
[Setting fi le]
You can download the setting data you have made into a fi le
and save it on the PC. On the contrary, you can upload the
setting data from the PC.
It is recommended to download the setting data as a backup
*
copy after you fi nish making settings or setting changes.

■ When downloading setting data onto the PC

1
Click Downloading setting data in the table of
contents.
2
Click to download the current setting data
Download
into a fi le.

■ When uploading setting data

1
Click Uploading setting data in the table of contents.
2
Click to upload the setting data from the PC
Upload
to the system.
You can select the setting data fi le from another window,
and upload it.
3 Update the system.
Refer to "Updating the system" below.
*
NOTE:
Uploading the setting data will overwrite the current data.
Updating the system
[Updating the system]
Update the system with the setting data you have entered
(currently stored temporarily).
1
Click Updating the system in the table of contents.
2
Click to update the system with the setting
Update
data currently stored temporarily.
NOTE:
Do not turn off the system while updating the system.
35