Aiphone IS SERIES Operation Manual
  1. Manuals
  2. Brands
  3. Aiphone Manuals
  4. Intercom System
  5. IS SERIES
  6. Operation manual
Aiphone IS SERIES Operation Manual

Aiphone IS SERIES Operation Manual

Security video intercom system
Hide thumbs Also See for IS SERIES:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating Manual, Installation Manual
IS SERIES
Commercial & Security Video Intercom system
Local System
OPERATION MANUAL
Thank you for selecting Aiphone for your communication and security needs. Please read this manual and the separate "SETTING
MANUAL" carefully before setting and using this system.
Please make sure to read this manual for safe and correct use of the system, and keep it in a safe place for future reference.
*
Please note that images and illustrations depicted in this manual may differ from the actual ones.
834171 E P0513AZ

Advertisement

Table of Contents
loading

Related Manuals for Aiphone IS SERIES

Summary of Contents for Aiphone IS SERIES

  • Page 1 Local System OPERATION MANUAL Thank you for selecting Aiphone for your communication and security needs. Please read this manual and the separate “SETTING MANUAL” carefully before setting and using this system. Please make sure to read this manual for safe and correct use of the system, and keep it in a safe place for future reference.

  • Page 2: Table Of Contents

    CONTENTS INTRODUCTION ......4 USING THE SYSTEM ....19 PRECAUTIONS ......4 RECEIVING AND ANSWERING A CALL ON THE MASTER WARNING ........4 STATION ........19 CAUTION ........4 GENERAL PRECAUTIONS ... 4 Receiving a call ......19 Notes on using this system ..5 Answering a call ......
  • Page 3 Calling another station (direct voice call) ......31 Monitoring ........32 ■ Monitoring ...........32 ■ Scan-monitoring .........32 Viewing video images at the target station ....... 32 Paging ......... 33 Chime paging ......33 OTHER FUNCTIONS ( combined ..34 with connected external devices) Activating room sub stations, IS-SS-2G audio door stations and central control units by detecting...

  • Page 4: Introduction

    4. As to other manufacturer’s devices (such as sensor, detectors, door releases) used with this system, comply with the 4. For power supply, use Aiphone power supply model or model Specifi cations and Warranty conditions that the manufacturers or specifi ed for use with system. If non-specifi ed product is used, venders present.

  • Page 5: Notes On Using This System

    21. During communication, if you speak before the other person • This manual was created by Aiphone Co., Ltd., all rights reserved. has fi nished talking, your voice may not come through clearly. Communication will proceed smoothly if you wait until the other Copying a part of or this entire manual without prior permission from person has fi...

  • Page 6: Getting Started

    GETTING STARTED PART NAMES Color monitor master station (IS-MV) ■ Control panel Status LED (red) Indicates the current status of Handset (→P. 20) Hook switch Color LCD monitor Speaker the master station by lighting up Call tones and communication See the next page or fl...

  • Page 7: Monitor

    ■ Monitor Display item examples List of stations or zones (→P. 27) The list of the stations or zones you searched for is shown here. Stations or zones are displayed either by number and/or name depending on the setting on the "INITIAL SETTING". “NOT AVAILABLE”...
  • Page 8 Display examples Displaying call and/or (chime) paging record and reception record [Standby mode] Call and/or (chime) paging record and reception record can be The monitor with no display (black) may also be in the displayed on the monitor for each up to 20 items. standby mode.

  • Page 9: Vandal-Resistant Video Door Station (Is-Dv And Is-Dvf), Vandal-Resistant Audio Door Station (Is-Ss, Is-Ss-2G)

    Vandal-resistant video door station (IS-DV and IS-DVF), vandal-resistant audio door station (IS-SS, IS-SS-2G) Vandal-resistant video door station Camera (→P. 21) (surface-mount) (IS-DV) Captures images to display on the monitor of the master station. Microphone Sends sounds from the door station to the master White light LED station.

  • Page 10: Room Sub Station ( Is-Rs )

    Room sub station ( IS-RS ) (Front) Handset (→P. 19) Speaker Outputs sounds from the master station. Hook switch Call button (→P. 19) Calls the preset master stations. Transmit LED (red) Lights up in red while your voice is heard at the target station, and turns off while you are hearing the sound from the target station or no communication is made.

  • Page 11: Outline Of Operations

    OUTLINE OF OPERATIONS The following describes the outline of operations you can perform in the system. Communication • From a sub station (door station or room sub station), you can call up to 20 preset master stations at the same time. •...

  • Page 12: Paging

    Paging On a master station, you can initiate paging or chime paging to the selected zone(s). All the stations previously registered to the zone(s) receive the paging or chime. (→P. 33) You can also call another master station or a sub station individually by direct voice call. The receiver can reply in the hands-free mode.

  • Page 13: Setting And Adjustment

    SETTING AND ADJUSTMENT MASTER STATION SETTINGS AND ADJUSTMENTS Make the basic and initial settings and adjustments on a master station after the system settings are completed. Make the settings and adjustments to all of the master stations individually. NOTE: First change the display language for the monitor screen to the language you need. (→ P. 14) Setting items You can make the settings and adjustments for the following items.

  • Page 14: Setting The Display Language

    The setting screen appears. Setting the display language When the master station is started up for the fi rst time, the [DISPLAY LANGUAGE] setting screen appears on the monitor. The display language for the monitor screen is set to English as default.

  • Page 15: Initial Settings [Initial Setting]

    SETTING When [BACK] is displayed, pressing Initial settings [INITIAL SETTING] will return to the setting screen. Make the initial settings before beginning to use the master station. You can set the following items under [INITIAL SETTING]. ■ [DOOR CALL TONE] ■...
  • Page 16 Setting the communication method for using Registering the desired stations and/or zones to the microphone and speaker [COMMUNICATION speed dials [SPEED DIAL] METHOD] You can register the stations and/or zones you frequently call You can select the communication method for using the or select for paging/chime paging to the speed dials.
  • Page 17 Setting the call transferring [TRANSFER] You can make the following settings for transferring calls. Press repeatedly to select the target sub item (so that it is highlighted), and then press Sub item Description Setting range ZOOM/WIDE to select. [CALL Enables (ON) or disables (OFF) TRANSFER] the call transferring.
  • Page 18 Setting the PRIVACY function [PRIVACY] Initializing the set contents [INITIALIZATION] Setting of the PRIVACY function is available when called from You can reset all the set contents to default. another master station. When the PRIVACY MODE is activated, the microphone turns Press repeatedly to select [INITIALIZATION] (so off and you will not be heard by the caller.

  • Page 19: Using The System

    USING THE SYSTEM RECEIVING AND ANSWERING A CALL ON THE MASTER STATION The following describes the communication method using this system. Receiving a call Answering a call The maximum duration of communication is preset in the Door station Room sub station Another master station System setting.

  • Page 20: Communication In The Press-To-Talk Mode

    <In the press-to-talk mode> ■ Communication in the press-to-talk mode You can communicate in the press-to-talk mode by (Available when "COMMUNICATION METHOD" is set pressing and holding TALK even when you are to "PTT" in the "INITIAL SETTING") communicating with the handset. <When called in from a sub station>...

  • Page 21: Viewing Video Images Of The Caller (At A Video Door Station)

    ■ Pan & Tilt Viewing video images of the caller (at a video door station) When a zoom image is displayed, pressing moves the image as shown below. You can view video images of the caller when receiving a call from, communicating with or monitoring a video door station.

  • Page 22: Adjusting Images

    To restore the image before adjustment ■ Adjusting images Press again. ADJUST If the image on the monitor is diffi cult to see, you can adjust the image. The icon is cleared and the image before adjustment is restored. Press ADJUST when the image is diffi...

  • Page 23: Transferring To Another Master Station

    ■ Call transferring Transferring to another master station You can transfer a call to the designated master station automatically (without answering it) by the "TRANSFER" You can transfer a call received from a sub station to another settings in the "INITIAL SETTING". (→P. 17) master station while communicating with it (communication transferring), as well as setting calls to be automatically This function is useful when you are absent or you cannot...

  • Page 24: Door Release

    Door release Using the PRIVACY function You can release the door lock while being called from, The PRIVACY function of a master station prevents you from communicating with, or monitoring a sub station if a door being heard by other master stations that call you. release device is connected to the station.

  • Page 25: Performing Calling, Monitoring, Paging And Chime Paging On The Master Station

    PERFORMING CALLING, MONITORING, PAGING AND CHIME PAGING ON THE MASTER STATION The following describes how to operate the master station to perform calling, monitoring, paging and chime paging. Searching for a station or zone Read this section before you perform calling, monitoring, paging or chime paging for the fi rst time to learn how to search for stations or zones.
  • Page 26 [In the SEARCH LIST] LIST or ZOOM/WIDE in the standby mode. Press The search items are shown in the SEARCH LIST. Press repeatedly to select the target search item (so that it is highlighted). ZOOM/WIDE LIST (001/002) Search items NAME SEARCH (→P. 27) STATIONS BY AREA (→P.

  • Page 27: Searching For A Station Or Zone From The List

    Searching for a station or zone from the list To delete the just entered character: Press Searching for a station or zone by entering the name [NAME SEARCH] Select [NAME SEARCH] either in the standby mode (→P. 25) or the SEARCH LIST (→P. 26). To enter the same characters or characters on the same dial key sequentially: Enter a name by using the dial keys.
  • Page 28 Searching for a station by designating an area Searching for a station by designating a station [STATIONS BY AREA] type [STATIONS BY TYPE] Select [STATIONS BY AREA] either in the standby Select [STATIONS BY TYPE] from the SEARCH mode (→P. 25) or the SEARCH LIST. (→P. 26) LIST.

  • Page 29: Searching For A Station Or Zone By Number Using The Dial Keys

    Searching for a paging zone from the list [PAGING Searching for a station or zone by number ZONE] using the dial keys Select [PAGING ZONE] from the SEARCH LIST. Enter the number of the station or zone you want (→P. 26) to search for by using the dial keys in the standby All the registered paging zones are displayed in the list.

  • Page 30: Searching For A Station Or Zone From The Placed Call Or Received Call List

    Selecting a station or zone by using the speed Searching for a station or zone from the dial buttons placed call or received call list Select a station or zone registered to one of the speed dials (1 You can search for a station or zone from the most recent 20 to 6) simply by pressing the corresponding speed dial button.

  • Page 31: Calling Another Station (Direct Voice Call)

    Press or ZOOM/WIDE or lift the handset to TALK Calling another station (direct voice call) start calling (talking). Follow the steps below to call a desired door station, room sub station or master station. Search for and select the station you want to call (so that it is highlighted) in one of the search methods.

  • Page 32: Monitoring

    ■ Scan-monitoring Monitoring You can monitor the preset stations (up to 20 door stations and/ You can monitor a sub station or multiple sub stations or room sub stations) sequentially, each for the set duration. sequentially (scan-monitoring) with a master station. The stations should be preset in the System setting on a PC.

  • Page 33: Paging

    Paging Chime paging The system allows you to page (transmit an announcement) The system allows you to make chime paging (transmit the selected zone(s) and/or station(s) simultaneously. a chime) to all the stations in the designated zone(s) simultaneously. NOTE: If you use zones, register zones in the System setting on a PC in NOTE: advance.

  • Page 34: Other Functions (Combined With Connected External Devices)

    OTHER FUNCTIONS (combined with connected external devices) Activating room sub stations, IS-SS-2G Activating an external device by detecting audio door stations and central control the designated action units by detecting contact input You can set central control units, add-on control units and room sub control units to activate the connected external devices You can set room sub stations, IS-SS-2G audio door stations when detecting the designated action: a call with an appropriate...

  • Page 35: Appendix

    Door stations are water resistant, however clean all the units with a soft cloth dampened with a neutral household cleanser. Do not use an abrasive cleaner or cloth. • If you are experiencing diffi culties in the use of the system, please check our website at http://www.aiphone.net/. (Our website does not support IPv6.) AVAILABLE CHARACTER LIST The following are the characters that can be entered with each of the dial keys on the master station for station or zone names and numbers.

  • Page 36: Specifications

    SPECIFICATIONS Central control unit (IS-CCU) Color monitor master station (IS-MV) Power source 48V DC (supplied from the power supply unit) Supplied from the central control unit or add- Power source on control unit Current consumption Max. 800mA Handset: Simultaneous communication Ambient temperature 0 - 40°...
  • Page 37 Vandal-resistant audio door station (fl ash-mount) (IS-SS) Supplied from the central control unit, add-on Power source control unit or room sub control unit Communication Open voice hands-free communication Ambient temperature -10 - 60°C (+14°F - +140°F) Mounting Flush-mount Electrical box Not used (mounts on built-in back box.) Front panel: Stainless steel Material...

  • Page 38: Warranty

    fi nal decision whether there is a defect in materials and/or workmanship; and whether or not the product is within the warranty. This warranty shall not apply to any Aiphone product which has been subject to misuse, neglect, accident, power surge, or to use in violation of instructions furnished, nor extended to units which have been repaired or altered outside of the factory.
  • Page 39 AIPHONE CO., LTD., NAGOYA, JAPAN...

Table of Contents