Changing Configurable Settings - Agilent Technologies 34405A User's And Service Manual

Changing Configurable Settings

The first seven items in the Utility Menu are configurable (Error and
CodE are not configurable).
1 To access the Utility Menu, press
2 The first Utility Menu selection (tESt) is shown in the primary display.
3 To change the setting, use the
4 When the correct setting is displayed in the secondary
If you set tESt to On, pressing Store/Recall immediately exits the Utility Menu and
N O T E
executes self-test. If you set tESt to OFF, go on to the next step (step 5).
5 Repeat steps 4 and 5 for all items in the Utility Menu.
6 When you reach the end of the Utility Menu, the primary display shows
34405A User's and Service Guide
When stepping through the configurable items, the present setting for
each item is displayed in the secondary display.
setting you want.
Recall
Recall
display, press
Edit
item.
utitY and the secondary display briefly shows donE, after which the
multimeter returns to normal operation.
Shift
Store Store
to save the setting and advance to the next
Features and Functions
Utility
Store Store
Recall
.
Recall
and keys to select the
2
37