Changing The Battery; Changing The Fuse; Operating And Storage Environment - Agilent Technologies 8163A User Manual

Operating and Storage Environment

Agilent 8163A Lightwave Multimeter, Agilent 8164A Lightwave Measurement System, & Agilent 8166A Lightwave
Multichannel System, Fourth Edition
Figure 153 AC Power Requirement Markings - Agilent 8166A

Changing the Battery

The Agilent 8163A Lightwave Multimeter System, Agilent 8164A Lightwave
Measurement System, and the Agilent 8166A Lightwave Multichannel System
contain a lithium thionyl chloride battery. The battery is not user replaceable. The
battery is protected against loading by a special circuit and must be installed with
the correct polarity. Changing the battery should be carried out only by Agilent
Technologies service personnel. If you need to get the battery replaced refer to
your nearest Agilent Technologies Sales/Service Office.

Changing the Fuse

There is no user replaceable fuse for the Agilent 8163A Lightwave Multimeter
System, Agilent 8164A Lightwave Measurement System, and the Agilent 8166A
Lightwave Multichannel System. Changing the fuse should be carried out only by
Agilent Technologies service personnel. If you need to get the fuse replaced refer
to your nearest Agilent Technologies Sales/Service Office.
The Agilent 8163A contains a F5.0A/250V fast-acting fuse.
The Agilent 8164A and Agilent 8166A contain a F10.0A/250V fast-acting fuse.
Operating and Storage
Environment
The following summarizes the operating environment ranges. In order for the
Agilent 8163A Lightwave Multimeter System, Agilent 8164A Lightwave
Installation and Maintenance
205