Specifications - Follett HCC1000A Operation And Service Manual

Specifications

Electrical
Each icemaker requires its own separate circuit with electrical disconnect within 10 ft (6m).
Equipment ground required.
Standard electrical – 208-230/60/1
Maximum icemaker fuse – 15 amps each
Amperage – 11 amps
6 ft (2m) NEMA 6-15 cord and plug provided on icemaker
Plumbing
3/8" OD push-in water inlet
3/4" MPT drain
1/4" FPT condenser inlet (water-cooled condenser only)
1/4" FPT condenser drain (water-cooled condenser only)
Notes: 3/4" vented drain line must slope a minimum of 1/4" per foot (6mm per 30.4cm run).
Drain to be hard piped and insulated.
To prevent back flow, do not connect drains.
Separate drains for icemaker and condenser.
Water shut-off recommended within 10 feet (3m).
Follett recommends installation of Follett water filter system (part# 00130286) in icemaker
inlet water line.
Ambient
Air temperature
Water temperature
Water pressure – potable
Note: Water-cooled condenser pressure 150 psi (1034 kPa)
Heat rejection
Air-cooled rejects 11,300 BTU/hr
Water-cooled rejects 12,800 BTU/hr
Ice production
Air-cooled icemaker capacity/24 hrs.
Ambient Air Temperature F/C
F 60 70 80 90 100
C 16 21 27 32 38
50 1135 1100 962 828 786
515 499 437 376 357
10
1070 1000 916 816 728
60
486 454 416 371 331
16
70 1015 938 871 794 686
21 461 426 395 361 312
80 967 902 826 755 654
27 439 410 375 343 297
924 859 782 698 610
90
420 390 355 317 277
32
100˚F/38˚C max.
90˚F/32˚C max.
70 psi max. (483 kPa)
Water-cooled icemaker capacity/24 hrs.
Ambient Air Temperature F/C
F 60 70 80 90
C 16 21 27 32
lbs 50 1071 1035 975 885
kg 486 470 443 402
10
lbs 1025 979 912 826
60
kg 465 444 414 375
16
lbs 70 971 932 870 786
kg 21 441 423 395 357
lbs 80 912 888 839 759
kg 27 414 403 381 345
lbs 849 842 814 745
90
kg 386 382 370 338
32
50˚F/10˚C min.
45˚F/7˚C min.
10 psi min. (89 kPa)
100
38
762 lbs
346 kg
723 lbs
328 kg
683 lbs
310 kg
642 lbs
292 kg
603 lbs
274 kg
5