Follett HCC1000A Operation And Service Manual page 6

Dimensions and clearances
Entire front of icemaker must be clear of obstructions/connections to allow removal.
1" (26mm) clearance above icemaker for service.
1" (26mm) minimum clearance on sides.
The intake and exhaust air grilles must provide at least 150 sq in (968 sq cm) of open area.
Air-cooled model HCC1000A icemakers – 18" (458mm) minimum clearance between discharge and air
intake-grilles.
Front View
Air intake
Side View
21.28" (541mm)
23.50"
(597mm)
21.05" (535mm)
22.8" (580mm)
Ice transport hose connection
Air exhaust
both sides
NEMA 6-15 L2
G
right angle
L1
1/4" FPT
condenser drain
1/4" FPT
15.56"
(395mm) condenser inlet
6.95"
(177mm)
2.53
(65mm)
1.75" (45mm)
min. req'd
3/8" OD push-in water inlet
3/4" MPT drain
6
Back View
Air exhaust
26.63" (677mm)
2.43" (62mm)