Table of Contents
Advertisement
To edit an existing user account, click the
4.
password you wish to change.The "Edit the local user" page appears; refer to the
figure below for the New local user page, since the Edit page is identical.
5.
Mark the Enable user radio button to make the user account available for use.
Alternatively, mark the Enable user on the specific date, and then specify the date on
which to activate the local user account if you wish to defer activation of the account
to a future time.
Enter the user's name in the Name field.
6.
User settings
Select a role from the Role drop-down list to assign to the user.
1.
See "Defining User Roles to Enforce Network Usage Policies" on page 8-2 to define
a new role available for selection in the drop-down list.
Alternatively, you can select the Create... option to open a window that enables you
to define a new role. After you save the role information, you are returned to the
New Local User page where you can select the role from the drop-down list.
Optional. If the user is connecting to the BSC using IPSec, then enter the user's e-mail
2.
address in the E-mail address field.
3.
Optional. If the user is connecting to the BSC using a Windows 2000 IPSec client,
enter the IP address of the Windows 2000 IPSec client in the Fixed IP field.
Optional. Limit the number of concurrent active login sessions the user can open to
4.
the BSC by entering a value in the Active Sessions field. The default value is 1 (0
indicates an unlimited number of sessions).
BlueSecure™ Controller Setup and Administration Guide
Creating/Editing/Deleting a Local User Account
Figure 5-1: New Local User Page
icon corresponding to the user whose
5-3
Advertisement
Table of Contents
