Select Destination Group from the Create drop-down list on the Destinations page.
2.
The Create a (destination) group page appears as shown in Figure 8-13.
Enter a meaningful name for the device group in the Name field.
3.
Select one or more destinations from the Available Items list to include in the
4.
destination group and then click Add highlighted items.
The selected destinations are added to the Selected Items list.
To add all available destinations to the destination group, simply click Add all items
in list.
Optional. Click Remove highlighted items or Remove all items in list to remove
5.
destinations from the group.
6.
Click Save to store the information to the BSC database or Save and create another
to continue defining destination groups.
You might be prompted to restart the BSC. We recommend that you do not restart the
BSC until you have completely finished configuring the BSC for use in your network.
Creating Network Services and Services Groups
The BSC includes a set of common pre-defined network services that users can access,
i.e., that can be passed through the BSC, if permitted by the role to which the users are
assigned. Here is a partial list of network services already included to the BSC database:
•
DNS - Domain Name System
•
Exchange-TCP - Connection to mail server over TCP
•
Exchange-UDP - Connection to mail server over UDP
•
FTP - File transfer protocol
•
GRE - Generic routing encapsulation
•
HTTP - Hypertext transport protocol
•
HTTPS - Hypertext transport protocol, secure
•
ICMP - Internet control message protocol
•
IMAP - Internet message access protocol
•
KERBEROS - Symmetric key cryptography authentication system
BlueSecure™ Controller Setup and Administration Guide
Creating Network Services and Services Groups
Figure 8-13: Create a (Destination) Group Page
8-13